SPEC. CUSTOMER FEATURES PARAMETERS
This object gathers attributes that are specific to certain customers
System_Option
BMI Data
Specific usage
This attribute is used in the context of hybrid logical links with compressed accesses and VPN overflow on public B channel.
When the compressed access becomes operational again following VPN overflow:
YES:
- the DATA communications are cut off by the 4400, communications must be re-established by the calling applications which were cut off.
- the voice communications remain in VPN overflow.
NO:
- the DATA and voice communications remain in VPN overflow.
The management criterion is the charging cost of DATA communications which are generally quite long.
Centrex On
YES: Activation of the Centrex application (Multi-Company)
PAGE provider
YES: Activation of the PAGE service (PCX Access for GSM Enterprise)
Service sub address
YES: Activation for the PAGE service (PCX Access for GSM Entreprise)
This attribute should also be set to YES to enable the PAGE service to work.
nb digits to wait
Parameter used by the Pop Server application: number of digits on which the external server interrogation is based (0 to 10).
Pop server enables:
- attendant connection
- the access server feature in attendant interconnection mode
Digicom7 On
YES: Activation of the Digicom7 service
Digicom7 enables switching between the radio channels and external networks. It is managed by a CSTA server.
CSTA No Delay
YES: optimization of the CSTA message exchanges used to provide the Digicom7 functions. Necessary in the framework of Digicom7 radio communications.
Priority with A4300
YES: priority EI sent in 4300 format on the network.
Priority with ACT
YES: Pre-empting on inter-ACT links authorized.
Reminder: when there is a priority call, if the conditions so allow, pre-empting makes it possible to release resources in order to set up the call. These resources may be released in routing (channel B for example) or on arrival (set).
Priority with ABC
YES:Pre-empting on links authorized.
Reminder: when there is a priority call, if the conditions so allow, pre-empting makes it possible to release resources in order to set up the call. These resources may be released in routing (channel B for example) or on arrival (set).
Ith Radio/Phone Audio Flux Separ.
This parameter concerns intercom users in the "standard" and "radio" intercom contexts.
YES: if the handset is off-hooked, the traffic loop or private call is heard on the handset and the other loops are heard on the loudspeaker (concerns UA 3G sets).
NO: the user hears all the loops in the handset.
NOTE :
The flow separation mode only works when the user is in "handset off-hooked" or "headset" mode.
Muted Channels During PTT Activat.
This parameter concerns intercom users in the "radio" intercom context.
YES: enables an intercom set to stop hearing the listening loops when speaking on a traffic loop (Push-To-Talk button in radio mode.)
NO: the user continues to hear the other loops.
Categories connection number
Choice by menu: 32/64/96/128/160/193/224/256
The number of classes of service is by default 32.
This number may be increased.
If the number is reduced, the request may be refused if certain classes of services that are to be deleted are used
WARNING :
For this attribute to be taken into account, the system needs to be rebooted.
Special Network On
YES: use of "special network" services
"Special network" is an application that provides the following services:
- Trunk supervision by attendant
- Name display for ABC trunk groups
- Voice guide connection for an outgoing or incoming call on a trunk group
This application is specific (developed for Germany).
Casual Conference
YES: On the basis of a classic 3-way conference, it is possible to have up to 6 correspondents (US).
NO: Real time conferencing is not offered in the context of the 3-way conference.
T1: precedence EI supporting
YES: Priority EI supported on T1-CCS trunk groups (ANSI T1.619 standard), MLPP mode (Multi Level Precedence and Preemption) in compliance with US standard (specific network).
Priority EI on the T1-CCS enables the priority to be carried on this type of network.
Depending on the content of the EI, the equivalent 4400 priority is allocated to the incoming T1 call. Transformation is carried out in the opposite direction for outgoing calls.
French Military Features
YES: use of the exploitations allowing CUG (closed user groups) management for French military exploitation.
No Call Announcement on busy set
NO: authorized to force call to loudspeaker on a set with an active call (with interruption of the in-progress call).
YES: not authorized to force call to loudspeaker on a set with an active call.
Do not cut Trunk Prefix
In the specific case of the called number being displayed during external call back on busy:
- NO: the trunk group seizure prefix is deleted
- YES: the trunk group seizure prefix is not deleted.
Example: a busy set receives an external call from the number 01 23 45 67 89, the caller activates call back on busy. If 0 is the trunk group seizure prefix in the installation, the call back displays 01 23 45 67 89 instead of 1 23 45 67 89. Likewise if the trunk group seizure prefix is 30 01 55, the number 30 01 55 66 55 54 (for example) becomes 66 55 54
No Voice Delay
NO : If there is no delay on voice connection
YES: If there is a delay on voice connection
No discrete listening (boss/secr.)
Load the Suproutage server
True - Suproutage server is loaded
False - Suproutage server is unloaded
Use Pilot Cos In Transfer
Voice Mail forwarding SIP auto att
It is to be able to let a message on the voice mail of the called number in case of an automated attendant SIP and when the Phone Features COS "Voice mail Forwarding" is at "Ring called set mail".
!! This option can be activate only in stand alone.
False (0) : inactive
True (1) : active
x89 40 keys AOMV
True: virtual add-on of x89 sets has 40 keys ; add-on modules are up to 80 keys for x8 sets and 50 keys for x9 sets.
False: virtual add-on of x89 sets has 72 keys ; add-on modules are limited to 50 keys
Reboot is Mandatory
Allow Reset of Busy DSU
True (Default Value): Desk Sharing Users can be logged-off (automatic or remote) even if they are engaged in conversation. In such case, call is released.
False: Desk Sharing Users can't be logged-off if they are engaged in conversation. Call is maintained and log-off is canceled.
DSU Auto Log-off Time
Enter a proper time value based to Auto log-off the Desk Sharing users.
Applicable only for Desk Sharing users.
-1 : No DSU Auto Log-off.
0 to 23(in Hrs) : AutoLogoff happens at this time.
Non Monitor Add on conference
TRUE : Will Not Monitor Add on Conference on AOM. FALSE : Will Monitor Add on Conference on AOM
Dynamic Office
This object gathers attributes that are specific to certain customers
DDI Trans. for filtered numbers
If different from -1, this DDI translator is used to re-translate initially called number in case this number is a "Filtered Called Number".
The call is then routed to result of this translation.
Default value is -1
Special QSIG Network
No unanswered calls if MyIC App
True: Callback requests and unanswered calls are not accessible via "Messaging" page if MyIC application is available on set
SOSM DDI Translator
SOSM DDI Translator
Display trunk group name
Default value: Yes
Yes: for external incoming and outgoing calls, display trunk group name in addition to called or calling number on sets x038, x039 and x068.
If external number is not known only trunk group name is displayed.
If a name can be associated to external number only name and number are displayed.
Max participants in casual conf
Defines the maximum of participants in one Casual Conference.
Value = Maximum number of participants desired + 2 (1 Master user + 1 Beep)
The Possible values: 7or 15 or 30 (Default value: 7)