Alcatel Unleashed

Hi,

you're right. I made a mistake. The correct configuration is:
netadmin –m
Routing
Static route
Add/update
Destination type ? h
Destination IP address: 10.253.1.10
Gateway IP address: 172.30.253.1

In the static route configuration, try to put the subnetmask like this: 255.255.255.0

Hi,

1st you have to declare node 1 on your Omnivista 4760: (main parameters)
node number: (ABC network number * 100 + node number): in your case, 1
IP address: Main IP address: 10.253.1.3
Connection Type: LAN


Next you have to declare your Node 2 on your Omnivista 4760: (main parameters)
node ...

Hi,

check the trunk COS of your SIP Trunk group. (It should be 31). Then in External services -> Trunk COS 31 try to play with parameter Timer T310 (by default 20s).
This is the timer use to overflow from one route to another one in ARS table.

Hi,

next week, I'll have to configure a T2-E1 Trunk Group in Germany. I would like to know if there is something different ( specific) from the basic configuration that we can find in the Alcatel OXE documentation.

thanks a lot.

you're right Vad. You can use 4039 as agent only from R7.0

hi Xero,


as pro-acd set for an agent, you can use Analog set, 4004, 4035, 4037, 4038, 4039 and 4068.

as pro-acd set for a supervisor, you can use 4035, 4037, 4038, 4039 and 4068.

Bye

Hi Mustafa,

did you declare your first node as gateway link when you set the 2nd node in the system directory?
You also need to create a static route (using netadmin) in the 2nd node to be able to join the first one through IP/X25 tunnel.

BR

Hi xister,

your pilot is assigned as "Pilot direct call" in a Processing Group. That's why you can't delete it.

bye