Alcatel Unleashed

I have the following setup

(PC) ==== (OS6450) === (Omnivista2500)

I have setup 802.1x with CP, but I only can access to the switch CP.
How can I use the OV CP in stand to authenticate ? Or the AOS6 do not support it?

Best regards

Jose

Hello everyone,

I have the OV making authentication with 802.1, MAC and CP. now I have a new chanlange, I need to create a mac policy to allow all mac (range) of a specific vendor. So we can push it to all switch's. It's possible? Can anyone point me in the right direction?


Thanks!!
Jose

Hello everyone,

I got an ALE300 phone, when I plug the phone it star to boot, show on the screen ALE300 banner and flash do green led. and stay there!! Any ideas??

Hello everyone,

I have a issue with supplicant user and CP on the 6450.

At my company, external contractors use there own laptop to work.
When they arrive, they plug the laptop to the switch, they must wait for the fail of the supplicant process , and proceed to the CP logon.
After the ...

Hello Silvio,

I have make my way to put the 802.1x authentication to work. After read some documentation about access guardian!!

are you using the correct db9/rj45 adapter?
Are you using a strait patch cord?
when the switch boots do you see any output on the console (putty for example)
The cisco (blue) cable doesn't work !!

you can limit the number of mac address learn on the port.

port-security 1/1 admin-status enable
port-security 1/1 maximum <number of mac>

Or you can specify the mac allowed on the port

port-security 1/1 mac <Mac address>

Hello,

Did you try to use the mac as user and password but without ":" and using capital charters?
And try to put the "block" before the "fail"

Hello everyone!!

I need some guidance to be able to understand the 802.1x configuration on OV2500.
I have a OV2500 4.4R2 demo lab installed on my VMware, one OS6450 switch a Sonicwall Firewall and one AP1101.

I have all this devices on OV, I have setup a pre-shared Key WI-FI network, and ...

Hello every one,

I have the following scenario:

2 Offices with 2 Vlans and one internet access.

I have created 3 VRF, one for each office and one for the internet access.
So far no issue.

This is my VCboot.cfg file:

!========================================!
! File: /flash/working/vcboot.cfg ...