Alcatel Unleashed

Hi,

Have done similar before - ie flipping the connectivity from network i/f to IES and back - using an exec config, I also have a SAS-MXp here in the labs too that can test with - but yeah scripting is very limited on them.
I take it for all your parsing questions, you are referring to doing this ...

We provide hands-on support for Nokia data networking platforms, covering troubleshooting, feature testing, and design validation. Our team operates both well-equipped physical labs, equipped with genuine Nokia and other vendor hardware as well as high-capacity virtual lab environments. This setup ...

Hi,

The config looks fine - I guess depends on what you have coming in on your SAPs.
You mention LAGs - but the below are direct on ports.

In your vpls, only packets tagged with 300.2 will be picked up on first port. This is how packets will be sent out too.
Only packets tagged with 2 will be ...

The last post above from Stefan was solved offline. The configuration supplied above was correct, but just needed modifying to support null encapsulation. It worked fine then.

Thanks
Paramount

Hi,

To send this and to achieve the desired affect, I think you will need to use RTBH - remote triggered blackhole.

To do this, from your sending router, advertise a BGP route, but have the next-hop set to something don't use in the network - you do this on your BGP export policy.
Then on your ...

Great, glad it worked ok. Always some bits to look out for when using sims etc.

Paramount

Yeah exactly all the same for the SAS-M, SAS-T and SAS-MX. Not sure on others.
I can give you part numbers if you need them. I have a couple of AC ones here.

Thanks
Paramount

Hi,

If you mean remotely, the only way I know is to do a:

show chassis power-supply

===============================================================================
Chassis Information
===============================================================================
Power Supply Information
Number ...

Thanks for the update, my mistake, I was reading your bgp config as if it were global.
Great that it's all working for you now.

Paramount

Hi,

Did you get this resolved in the end? I am not fully seeing why with your initial topology you were seeing a loop.
Assuming you are pinging from VPC-A-4 - before you joined the switches together, your traffic path should be:

VPC-A-4 ---- sw-A-4 ----- router A-4 r-VPLS ----- router A-4 VPRN ...