Alcatel Unleashed

AOS 8 is different from AOS 6. In 8 you have to use the lanpower command to enable lanpower.

lanpower slot 1/1 service start

Use command: (from top of my mind)
vrf create test

It was a feature request in 8.5 so we don't end up with lots of unused misspelled vrf's.

Hi

You have to perform routing to reach the inline bvlan management ip.
Create an additional vlan on one of the switches and set the default gateway to the ip for the bvlan on this one on the other switches. The drawback is no redundancy for the management gateway at this time of code...

Hi, the configuration seems correct so check the admin status of the individual linkagg agg 2 interfaces on the OS6900.
If it's not working I'd look into FreeNAS settings.

Hi, the ssh on the 6450 is rather limited. I'd add PER (Product Enhancement Request) for this scenario to be supported.

One way of acheive the goal is to install python and try to run Netmiko or Paramiko and send the command through that implementation.

With a VRF for management you may also disable the ip services not needed in the default VRF. But as always there's pros and cons to every design choice.

What does "show spb isis services" command output?
That's the published services in the SPB.

I have been playing with SPB on two AOS switches some time now.

Set up the SPB between the two switches and put up some services to edge-ports and see that the traffic flows from sap (service access port) to a sap on the other switch.
Try to use the unp port features for automatic service ...

I have got a confirmation that ping replies to local interfaces on the router (the gateways) between VRFs will not function in current releases as of todays date.
But leaking works and you can ping from client to client.

Did you find a solution to this?
I have the same issue and have tried to find the missing part...