Alcatel Unleashed

Hello all
Sorry that I'm continuing here with question, but this is related.
When I delete the MAC address of the set, and try to validate (CTRL+V) the change is not saved.
There is no message "Command succeeded".
The set has multi-line enabled. I read on forum this is one of the parameters that is ...

Be aware of parameter "Number of warnings if no response" in General Parameters.
This define how many times AA message will be replayed beside that ONE time. Default value is 2. That means 1 + 2 = 3 times before call is transfered to default number. Keep it 0 if you want AA message to be played only ...

Hello,

I have problem with DECT 8232 on OXO R100.
System is in one cabinet, IBS stations are connected on the same card.
There was several DECT phones working properly. After one broke down (can't be turned on) we tried to change it with same model.
After is being unregistered with OMC ...

Update:
I talk with the very good engineer from SIP-provider site (not my provider) and he gives me a very good explanation.
When this type of calls are made, PBX is a key because it holds both sides connected.
In discussion he mentioned the voice codex, witch should be 711 as a standard, but ...

Hello to all

I need an explanation about traffic flow, so I can locate where the problem is...

I have an OXO pbx behind firewall with analog and digital phones. Connection with provider is trough SIP trunk, witch goes trough Sophos firewall.
PBX is connected on LAN network, and proper rules are ...

Update:
Problem is solved with another software update from version R060/026 to latest ALE version R060/029. We not discover what causes the error. Previously, there was some error on memory card, after latest update, it disapeared...

Additional explanation for the case:
1. PBX is one for 2 physical locations
2. both locations have different IBS: one location is with IBS 4070, the second is with IP-xBS 8378.
3. Behavior of DECT phone is the same on both locations.
4. DECT 8121 and random Panasonic DECT device have no problem with ...

Hello,
I have a problem with registration of DECT 8234 on new OXO software R6.0.
Previously, software was upgraded to version R6.0 to support DECT 8234.
After that, registration is possible, but when assign the DECT to subscriber number, registration fails with error.
The same is happening when I ...