Alcatel Unleashed

Thanks for your help. Some time ago I left only the first line and everything is still working the same.

Hello to all

My question is about how to verify that the ip multicast is performing some function on the 6450 switches. I am in the process of switching a 6450 device to a different vendor device.
I don't know very well how the 6450 works and it has some multicast lines configured that I don't ...

Thanks for your help, now the topology is working.
Those configurations I had not tried, I was only using QinQ encapsulation.

I hope the topic will help someone else as well.

Hello, thank you for the reply.
I tried but it is not possible.

Hi everyone.

I am trying to make a network topology as follows

https://www.alcatelunleashed.com/download/file.php?mode=view&id=4943

The idea is to try to get the ip's of vlan 2 and 4 to the other end through an epipe or vpls using qinq on the ports of the Nokia router that connects to the sw ...

Hi, thanks for your reply mivens.
I thought that might be the cause, but wanted to confirm with someone else.
I will have to use the Cisco router as ntp master then.

Regards.

Hi everyone.

I have a topology of a router A connected to a router B with ospf running.
I would like to leave router A as an ntp master server and leave router B as an ntp client, the idea is to add more clients for router A later on.
I have the following configurations.

In A:

A:A>config>system ...

Hello again Paramount.
I did what you comment in the previous answer and it solved the problem of port blocking by stp.
Before making the change of priorities the bridge-id were the same in both vpls and after giving priority to the router A interface, it changed its bridge-id and the sdp changed to ...

If you can share this data with me I would appreciate it, it would be a great help, so I don't make a mistake.

Hi thanks for the reply.
I knew that command, but wanted to see if you could find out the exact model to buy a replacement power supply.
But I would understand from what you mention that components such as power supplies and fans are compatible between the 7210 SAS line models. right?