Alcatel Unleashed

Hi,
Sorry for that.
I had configured port trust on Server Farm switch. but still facing the issue.

Is the configuration fine that i had done.
Do i need to configure DAI also along with DHCP-Snooping.

Dear Team.
I am stuck in DHCP snooping scenario. As i use to enable DHCP-Snooping on the switches, the PABX stops to give ip addresses to the IP phones.
PABX is connected with Server farm switch with VLAN 20 for voice. I enabled VLAN base DHCP-snooping on this switch and trusted the port on which ...

I did the same when the AOS is running.
usb enable
i save the configuration and reboot the switch.
entered in the miniboot but over there when tried to recover the image it showed the same issue.

I tried with the usb...its working on other switches.

Its a 2GB USB that is formatted in Fat32.
Tested the stick on the same switch because all other switches are in production and cant use the USB in those switches.
for the /uflash how to access please guide.

yes i have the life time warranty, so its better to send the switch for the RMA...there is no other option for this..right?

Dear Gurus.

One of the switch OS6860 is entering to miniboot automatically. In miniboot i am unable to give any command. Below are the error which i am facing:

BENCH SCREENING TEST1
=========================================
IPROC_XGPLL_CTRL_3: 0x15400000
IPROC_XGPLL_STATUS: 0x80000233
DCO code: 35 ...

Dear Gurus.

I am trying to go with image recovery procedure, for the recovery i followed the steps:

Took a USB 2.0 flash drive with 2 GB memory and it formatted in FAT32.
Inside the USB, created a folder named “6900”.
Inside the folder “6900”, created two folders named “working” and “certified” (i ...