After activate clip in sli 16 1 telephone not ringing

[adel_88]

I activated clip feature for sli 16 1 but unfortunately telephone didn’t ring while all dynamic init parameters set to be 255.is anybody know values to be set in dynamic init parameters.note I can pickup call while telephone didn’t ring.

Thanks in advance

[frank]

Before changing the dynamic parameters, did you check if the phone rings with a shorter pair ? Like if you connect the phone at the PBX directly rather than running a line to a distribution panel?

[adel_88]

Thanks frank

the problem solved by changing parameter. i checked old posts here and i found necessary parameters