After activate clip in sli 16 1 telephone not ringing

Post Reply
adel_88
Member
Posts: 4
Joined: 06 Mar 2017 02:41

After activate clip in sli 16 1 telephone not ringing

Post by adel_88 »

I activated clip feature for sli 16 1 but unfortunately telephone didn’t ring while all dynamic init parameters set to be 255.is anybody know values to be set in dynamic init parameters.note I can pickup call while telephone didn’t ring.

Thanks in advance
User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 2967
Joined: 06 Jul 2004 00:18
Location: New York
Contact:

Re: After activate clip in sli 16 1 telephone not ringing

Post by frank »

Before changing the dynamic parameters, did you check if the phone rings with a shorter pair ? Like if you connect the phone at the PBX directly rather than running a line to a distribution panel?
Code Free Or Die
adel_88
Member
Posts: 4
Joined: 06 Mar 2017 02:41

Re: After activate clip in sli 16 1 telephone not ringing

Post by adel_88 »

Thanks frank

the problem solved by changing parameter. i checked old posts here and i found necessary parameters
Post Reply

Return to “Beginner's questions about the Common Hardware”