SIP Failed for OXE and Avaya IPO 500
Re: SIP Failed for OXE and Avaya IPO 500
hi try to disable Round Trip Delay Request under >> mgr>IP>IP Parameters
Last edited by mgsox on 23 Sep 2020 08:38, edited 1 time in total.
Re: SIP Failed for OXE and Avaya IPO 500
poposami wrote: ↑27 Aug 2020 14:24 OXE-AVAYA SIP call disconnect after 31 seconds.pdfWe are facing outgoing calls disconnection from oxe to Avaya after 31 seconds.
Whereas calls from Avaya to OXE R12.2 are okay.Below is call flow where oxe does not acknowledge 200 OK sdp from Avaya
and eventually releases call with bye from Avaya.
I would appreciate suggestions ASAP as customer is very upset.
hi try to disable Round Trip Delay Request under >> mgr>IP>IP Parameters
Re: SIP Failed for OXE and Avaya IPO 500
@ vad, trkstat and motortrace.Please help me analyze.
You do not have the required permissions to view the files attached to this post.
Re: SIP Failed for OXE and Avaya IPO 500
There're no calls in the traces only registration message but i saw two message
488 error code so check the codecs offer
sipexgw=-3?! strange can u paste the local and extgw config
when u made call from oxe u got immediatly hung up? try to capture a trace while calling
488 error code so check the codecs offer
sipexgw=-3?! strange can u paste the local and extgw config
when u made call from oxe u got immediatly hung up? try to capture a trace while calling
Re: SIP Failed for OXE and Avaya IPO 500
Hi haroun,haroun wrote: ↑01 Oct 2020 08:50 There're no calls in the traces only registration message but i saw two message
488 error code so check the codecs offer
sipexgw=-3?! strange can u paste the local and extgw config
when u made call from oxe u got immediatly hung up? try to capture a trace while calling
here are the the extgw config:
when i made i call it says "Request Terminated" after 2 rings
You do not have the required permissions to view the files attached to this post.
Re: SIP Failed for OXE and Avaya IPO 500
what's ur system default codec ?
what's the trunk group 2 codec type ?
looks like the codecs are mismatch
what's the trunk group 2 codec type ?
looks like the codecs are mismatch
Re: SIP Failed for OXE and Avaya IPO 500
could you have a check on the codecs enabled @ Alcatel side and Avaya side is matching or having a common codec selection to agree upon.
Normally the SDP session fails if there is no common codecs at both sides.
./regards
Fegy Simon
Normally the SDP session fails if there is no common codecs at both sides.
./regards
Fegy Simon
Re: SIP Failed for OXE and Avaya IPO 500
hi, hope you have resolved your problem. cus i have the exact issue as well. can you help or let me know what was the issue? thanks.poposami wrote: ↑27 Aug 2020 14:24 OXE-AVAYA SIP call disconnect after 31 seconds.pdfWe are facing outgoing calls disconnection from oxe to Avaya after 31 seconds.
Whereas calls from Avaya to OXE R12.2 are okay.Below is call flow where oxe does not acknowledge 200 OK sdp from Avaya
and eventually releases call with bye from Avaya.
I would appreciate suggestions ASAP as customer is very upset.