8088 Reset

Post Reply
leola
Member
Posts: 2
Joined: 10 Jul 2020 12:32

8088 Reset

Post by leola »

Hello,

I do not have the 8088 smart admin pin code,
How can I gain it back or reset to factory default.

thanks
User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 2967
Joined: 06 Jul 2004 00:18
Location: New York
Contact:

Re: 8088 Reset

Post by frank »

Enable connection to 8088 via OXE's telnet :
Command "ippstat".

Choice 15 (Timeout for telnet session of IP Touch set).

Enter the directory number of the set.

Set the timer to 1440 (for example).

Get the IP Address of the set through its interface or via command "ippstat d <directory number>".

Connect to the set via SSH :

Command "ssh -2 admin@<ip address of set>".

Use default password "*tx8000#" or use the one specified in OXE's Series 8 & 9 Parameters.

Once connected to the set via SSH, type the "reset flash" command to perform the factory reset.
Code Free Or Die
leola
Member
Posts: 2
Joined: 10 Jul 2020 12:32

Re: 8088 Reset

Post by leola »

Actually I do not have a Oxe installed, I got the phone from a leftover of a demo pack.
Could I use the phone without Oxe ? I Would like to use it as a personal use just with a SIP account at my ISP.
Thanks
User avatar
frank
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 2967
Joined: 06 Jul 2004 00:18
Location: New York
Contact:

Re: 8088 Reset

Post by frank »

You need to get into the programming mode then.
While the phone is in PHASE 2, press the i key (not on the keyboard, but at the bottom of the screen), and then the # key
Then somewhere in there, there is a menu to switch the phone from NOE into SIP
Once you do that, you can add your account (still need to be done in the config I think) after it reboots.
Code Free Or Die
Post Reply

Return to “ipTouch (40x8) issues and tricks”