IP Touch 4028 et 3cx

[antoninmery74]

French:

Bonjour,
je cherche à faire fonctionner mon alcatel IP Touch 4028 avec 3CX.

mon tel ip est bloquer sur NOE et je voudrai le débloquer

j'ai vu qu'il fallait des fichier sipconfig.cfg j'aimera en savoir plus.

merci
*************************************************************************************
English :

Hello,
I am looking to operate my Alcatel IP Touch 4028 with 3CX.

my ip is blocked on NOE and I want to unlock it

I saw that sipconfig.cfg file needed I would like to know more.

thank you

[solven]

It depends, if you want to run your 4028 as a sip phone you need the sipconfig.cfg, if you don't, then you don't need it.

For NOE the phone downloads lanpbx.cfg and NOE<macadress>.cfg. lanpbx is the file that desides the tftp server and such,but I'm not quite sure what the NOE<macadress> file does, but it gets downloaded.

For dhcp you would need to set option 66 to the ip adress of your tftp server(the server with the lanpbx.cfg file) and 67 to "lanpbx.cfg" without the quotes. You might need option 43 aswell, but I don't know what it would say. Please search to forum for questions about Ip phones on external dhcp, they are more detailed than this.

When you do this it should work (I don't know if it will, but in theory it should)

[antoninmery74]

Bonjour,

pour le fichier sipconfig.cfg j'ai télécharger un fichier que j'ai completer avec mes infos SIP de 3cx. j'ai mis un serveur tftp sur mon PC il recupère bien le fichier mais impossible " no tftp reponse".

moi je veux pouvoir passer mon téléphone du mode NOE au mode SIP mais c'est impossible dans le menu du téléphone

j'aurai vrament besoin d'aide

Antonin


*************************************************

Hello,

for the file sipconfig.cfg I downloaded a file that I completed with my SIP info of 3cx. I put a tftp server on my PC it recover the file well but impossible "no tftp answer".

I want to be able to switch my phone from NOE mode to SIP mode but it is impossible in the phone menu

I will definitely need help

Antonin

PS: sorry for my approximate english

[antoninmery74]

Hello,

for the file sipconfig.cfg I downloaded a file that I completed with my SIP info of 3cx. I put a tftp server on my PC it recover the file well but impossible "no tftp answer".

I want to be able to switch my phone from NOE mode to SIP mode but it is impossible in the phone menu

I will definitely need help

Antonin

PS: sorry for my approximate english

[solven]

Did manage to download the sipconfig.cfg file or not? Your sentence sort of says both.

To switch between application modes on a set follow theese steps:
1. turn off the set
2. turn it on again
3. when it's at network start press "i" and "#"
4. go to the "soft infos" menu
5. there is only one parameter here, click it to switch between "NOE" and "SIP"
6. click back
7. click on the running man on the top right

[antoninmery74]

Hello,

I use a tftp server:
http://kin.klever.net/pumpkin#.Wo1t_q7ia70

The phone finds my server but apparently the phone needs the file "lanpbx.cfg"

I already try to change the mode in the settings but impossible
the phone emits a bip when I go to change the mode

******************************************************************
main menu

MAC Adress IP Param

Soft Infos Hard Infos

********************************************************************
Soft Infos

Version NOE 3.91.90

Run Mode NOE it is impossible to modify

*******************************************************************************************************

Software Version :NOE 3.91.90
Appl* NOE 3.91.90
DATA NOE 3.91.90
Load 3.91.90
boot : 4.10.01
L10n (none)



The max of info that I have

[antoninmery74]

Here is my configuration file



###########################################################################

# #

# 4008EE / 4018EE SIP-Touch sets configuration file #

# SIP : 2.00.81 & 2.00.90 #

# #

# This example contains all parameters which may be managed via the #

# config file and is in line with 3AK_29000_0285_PEZZA_17 #

# #

###########################################################################







###########################################################################

## Syntax informations :

##

## All parameters are grouped by sections (the section name is specified

## with the syntax [section1]). The content is UTF-8 encoded

## Each configuration item uses a single line with a "key=value" pattern

## "Key" content starts at the first none-space character and ends with "="

## or " ="

## "Value" content starts at the first none-space character and ends at the

## "\n\r"

## If the value is empty, the terminal should use the default value instead

## Lines starting with "#" will be ignored as a comment

## The items of a list are separated by a ","

###########################################################################





[dns]



###########################################################################

## The primary DNS IP address HAS TO BE FILLED

## If no DNS, use the SIP proxy address instead

###########################################################################

dns_addr=change_me

dns2_addr=

hostname=





[sip]



###########################################################################

## Domain name : IP address, FQDN or domain name (see the SIP proxy config)

###########################################################################

domain_name=change_me

###########################################################################

## Primary SIP proxy and SIP registrar settings

##

## Proxy address : IP address, FQDN or domain name

## Registrar address : IP address, FQDN or domain name (usually, the proxy)

## SIP proxy UDP port : usually 5060

## SIP registrar UDP port : by default 5060

###########################################################################

proxy_addr=change_me

proxy_port=5060

registrar_addr=change_me

registrar_port=5060

outbound_proxy_addr=

outbound_proxy_port=

###########################################################################

## Redundancy settings

##

## Proxy address : IP address, FQDN or domain name

## Registrar address : IP address, FQDN or domain name (usually, the proxy)

## SIP proxy UDP port : usually 5060

## SIP registrar UDP port : by default 5060

## sip_transport_mode_survi : Transport mode in PCS mode

## 0 = UDP or TCP

## 1 = UDP

## 2 = TCP

###########################################################################

## proxy2_addr=
## proxy2_port=
## registrar2_addr=
## registrar2_port=
## outbound_proxy2_addr=
## outbound_proxy2_port=
## pcs_addr=
## pcs_port=
## sip_transport_mode_survi=
## option_timer=

###########################################################################

## Global SIP parameters

## Transport mode : 0 = UDP or TCP

## 1 = UDP

## 2 = TCP

## local_rtp_port : RFC3605 is not supported in this release, so

## only default value can be used

## PRACK type : 0 = PRACK supported

## 1 = PRACK required

## 2 = PRACK disabled

## Codec settings : 0 = G711 (PCMU)

## 4 = G723.1

## 8 = G711 (PCMA)

## 18 = G729A

###########################################################################

register_expire=3600

register_retry=300

local_sip_port=

sip_transport_mode=0

local_rtp_port=6000

local_rtcp_port=6001

prack_type=0

preferred_vocoder=8,0,18,4

###########################################################################

## SIP authentication.

##

## Realm : If no authentication, leave empty

## Authentication name : HAS TO BE FILLED

## If no authentication, PUT A VALUE LIKE none

## Authentication password : If no authentication, leave empty

###########################################################################

authentication_realm=change_me

authentication_name=change_me

authentication_password=change_me

user_name=change_me

display_name=change_me

###########################################################################

## Voicemail settings

##

## Voice mail URI : directory number of the voice mail

## user name : directory number of the set

## MWI URI : complete SIP URI of the voice mail

###########################################################################

voice_mail_uri=

message_waiting_indication_uri=





[qos]



###########################################################################

## SIP & RTP DIFFSERV : [0,63]

## SIP QOS Tickets : 0 = disable

## 1 = enable

## SIP QOS Tickets Target : domain name

###########################################################################

sip_diffserv=0

rtp_diffserv=0

sip_qos_tickets_enable=0

sip_qos_tickets_target=





[sntp]



###########################################################################

## SNTP server settings (can be OXE or an external server)

##

## Timezone construction : UT::60:032902:102503

## GMT delta : 60 = + sixty minutes from GMT time

## Daylight saving start (mmddhh) : 032902 = 29 March 2am

## Daylight saving end (mmddhh) : 102503 = 25 October 3am

## The daylight saving settings HAVE to be changed each year.

###########################################################################

sntp_addr=

timezone=UT::0:032902:102503





[telnet]



###########################################################################

## Password to access the telnet session

###########################################################################

telnet_password=000000





[arp]



###########################################################################

## Mode : 0 = ARP spoofing disabled

## 1 = ARP spoofing enabled

###########################################################################

arp_spoofing_enable=1

arp_spoofing_timer=30





[init]



###########################################################################

## For IP Touch with SIP binary in 1.xx, 2.00.10 and 2.00.20, equal or greater than 2.00.81

## mode 0 = SIP

## mode 1 = NOE

##

## For IP Touch with SIP binary 2.00.30 to 2.00.80

## mode 0 = NOE

## mode 1 = SIP

###########################################################################

application_mode=0





[audio]



###########################################################################

## Tone country : 0 = English

## 1 = French

## 2 = German

## 3 = Italian

## 4 = Spanish

## 5 = Dutch

## 6 = Portuguese

## DTMF type : 0 = RFC2833

## 1 = In-band

## 2 = SIP INFO

## DTMF level / RLR handset / SLR handset / Sidetone handset :

## 0 = 0db, 1 = +3db, 2 = +6db, 3 = -3db, 4 = -6db

## VAD / DTMF feedback / Hearing Aid :

## 0 = VAD not used

## 1 = VAD used

###########################################################################

tone_country=0

dtmf_type=0

dtmf_level=0

dtmf_avt_payload_type=97

vad=1

dtmf_feedback_enable=1

rlr_handset=0

slr_handset=0

sidetone_handset=2

hearing_aid_enable=0





[appl]



###########################################################################

## Password to access the administrator menu on the phone (digits only)

## Power priority : 1 = critical

## 2 = high

## 3 = low

## Time format : 0 = 24 hours format

## 1 = AM / PM

## Speed dial numbers (first and last name, URI)

###########################################################################

admin_password=000000

bluetooth_parameters=blue

supported_language=0

remote_forward_code=

remote_forward_deactive_code=

power_priority=

asset_id=

time_format=0

speed_dial_1_first_name=

speed_dial_1_last_name=

speed_dial_1_uri=

speed_dial_2_first_name=

speed_dial_2_last_name=

speed_dial_2_uri=

speed_dial_3_first_name=

speed_dial_3_last_name=

speed_dial_3_uri=

speed_dial_4_first_name=

speed_dial_4_last_name=

speed_dial_4_uri=





[admin]



###########################################################################

## Global admin parameters

## Binary polling timer : 10 min - 65535 min (default 480 min)

## Config polling timer : 5 min - 65535 min (default 60 min)

###########################################################################

binary_polling_timer=10

config_polling_timer=10

disable_pc_port=0

activate_vlan_filter=0


[telnet]
telnet_password= 00000

[cavagnaro]

Your set is still as NOE, so is asking about full info on how to work as NOE. Your first task is to switch to SIP mode, otherwise you are doing circles without sense.
Check in your firmware allows effectively to change to sip mode, otherwise you need first to load a new binary.
Check the forum, the info is around. I don't have it at hand.

Enviado de meu E6633 usando Tapatalk

[antoninmery74]

Where can I find this famous firmware and how to load it into my phone?

[cavagnaro]

Please search the forum, there is a good post about it. That post if not wrong included a PDF and the binaries. All info was in there.

Enviado de meu E6633 usando Tapatalk