I am trying to configure an audiocodes MP204R with an OXE 12.0 to connect an analog Fax.
Fax transmission is failing. Has anyone tried to configure these audiocodes MP204x ?
I was able to make phone calls behind the audiocodes though.
User is created as SIP device.
SIP device is registered successfully.
T38 enabled on the audiocodes.
AAPP shows no information on audiocodes 20x, only MP11x are supported for fax.
SIP trace shows no T38 INVITE in SIP messages
Audiocodes MP204R
Audiocodes MP204R
You do not have the required permissions to view the files attached to this post.
Re: Audiocodes MP204R
SIP 200 is not acknowledged on 10.8.100.100.
ANd check which "Fax Transport Mode" is set in MP204.
ANd check which "Fax Transport Mode" is set in MP204.
If it looks like a duck, swims like a duck, and quacks like a duck, then it probably is a duck.
Re: Audiocodes MP204R
On the MP204, T38 is set for Fax transport
Re: Audiocodes MP204R
OK.
So check why "SIP 200 OK" is not acknowledged by 10.8.100.100.
So check why "SIP 200 OK" is not acknowledged by 10.8.100.100.
If it looks like a duck, swims like a duck, and quacks like a duck, then it probably is a duck.