Every time the 6400 switch is turned on, it goes into mini boot.

Post Reply
syscloud
Member
Posts: 1
Joined: 29 Jul 2021 04:14

Every time the 6400 switch is turned on, it goes into mini boot.

Post by syscloud »

Hello friends;
The 6400 switch boots itself from miniboot all the time. Files other than the "boot.params" file have been deleted in the miniboot partition. I tried to recover with usb stick, it didn't work. I created the "working" and "certified" folders with the 'mkdir' command. I set the baud rate to 115200. I'm trying to send files to the "working" folder with Zmodem, but the copying pauses after a certain time.. I would be glad if you help.

Thanks.
You do not have the required permissions to view the files attached to this post.
Bertote
Member
Posts: 3
Joined: 21 Sep 2021 15:23
Location: Florianopolis - Brazil

Re: Every time the 6400 switch is turned on, it goes into mini boot.

Post by Bertote »

Hi, have you tried with a lower transfer rate?
Tried with a shorter cable? long cables can give problem with zmodem transfer.

Sorry for changing the subject, but could you help me? Is the firmware version you are trying to upload to the switch a 6.4 version? If so, could you send me the files please?
Post Reply

Return to “OmniSwitch 6400”