HI All,
Greetings!!!
Please help me to know any command or procedure to check the IP Set configuration setting remotely.
I want to check the IP configuration of IT set like:
TFTP1:?
TFTP2:?
STATIC or DYNAMIC: ?
Thanks for your prompt response.
Regards
Gaurav
How to check IP SET configuration setting remotely
-
- Member
- Posts: 10
- Joined: 07 Aug 2009 11:21
Re: How to check IP SET configuration setting remotely
you can telnet to the phone to check the settings. use the ippstat command to open telnet access to the device.
Best Regards
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
-
- Member
- Posts: 10
- Joined: 07 Aug 2009 11:21
Re: How to check IP SET configuration setting remotely
Thanks Murray...
This is what I am looking for.
Thanks for your quick reply.. Have a nice weekend!!!
This is what I am looking for.
Thanks for your quick reply.. Have a nice weekend!!!
-
- Member
- Posts: 10
- Joined: 07 Aug 2009 11:21
Re: How to check IP SET configuration setting remotely
HI
I am getting below result via telnet IP@ telephone/ config command.
What is the difference between Current and Flash and how can I change FLASH configuration??
Thanks i n advance
For one extension current and Flash values are
config CURRENT
dhcp mode : dynamic
ip addr : 10.233.97.59
subnet mask: 255.255.255.0
router addr: 10.233.97.2
tftp addr 0: 194.4.112.125
tftp addr 1: 255.255.255.255
tftp_backup: 10.233.97.7
tftp port : 69
main cpu 0 : 194.4.112.125
main cpu 1 : 255.255.255.255
main port : 69
VLAN : 100 (0x64)
use VLAN : yes
strict VLAN: yes
boot mode : full
port lan : 100/full
port pc : no link
init mode : 0x0 (none)
phy addr 1 : 194.4.112.126
phy addr 2 : 194.4.112.124
cust (val) : <invalid>
cust (req) :
L10N (val) : <invalid>
L10N (req) :
Regards
Gaurav
I am getting below result via telnet IP@ telephone/ config command.
What is the difference between Current and Flash and how can I change FLASH configuration??
Thanks i n advance
For one extension current and Flash values are
config CURRENT
dhcp mode : dynamic
ip addr : 10.233.97.59
subnet mask: 255.255.255.0
router addr: 10.233.97.2
tftp addr 0: 194.4.112.125
tftp addr 1: 255.255.255.255
tftp_backup: 10.233.97.7
tftp port : 69
main cpu 0 : 194.4.112.125
main cpu 1 : 255.255.255.255
main port : 69
VLAN : 100 (0x64)
use VLAN : yes
strict VLAN: yes
boot mode : full
port lan : 100/full
port pc : no link
init mode : 0x0 (none)
phy addr 1 : 194.4.112.126
phy addr 2 : 194.4.112.124
cust (val) : <invalid>
cust (req) :
L10N (val) : <invalid>
L10N (req) :
Regards
Gaurav
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: How to check IP SET configuration setting remotely
Current is what is on memory right now. Flash is what is stored on the set flash mem so when you reboot flash config is loaded into memory (current )
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 10
- Joined: 07 Aug 2009 11:21
Re: How to check IP SET configuration setting remotely
Thanks Cavagnaro for your quick reply. But could you please tell me who can I reset the Flash memory.
Shall I reset the extension or del/create or any other command or procedure to do do??
Thanks
Gaurav
Shall I reset the extension or del/create or any other command or procedure to do do??
Thanks
Gaurav
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: How to check IP SET configuration setting remotely
Why would you wanna do that? Just reprogram the set on the PBX.
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
-
- Member
- Posts: 10
- Joined: 07 Aug 2009 11:21
Re: How to check IP SET configuration setting remotely
Okay .. Thanks a ton for your help!!!
Regards
Gaurav
Regards
Gaurav