Hi all,
I have an OXE rel 9.0 working fine, there is an issue when I try to execute some command as trkstat,config,twin,( this is'nt exaustive list) under mtcl user:
The mgr and swinst menu work fine as well "role" command
This is an example:
> config all
bash: config: command not found
When a execute help command:
> help
GNU bash, version 2.05b.0(1)-release (i486-mandrake-linux-gnu)
These shell commands are defined internally. Type `help' to see this list.
Type `help name' to find out more about the function `name'.
Use `info bash' to find out more about the shell in general.
Use `man -k' or `info' to find out more about commands not in this list.
I will appreciate any help to solve it.
Regards,
M
"command not found" error on OXE
- cavagnaro
- Alcatel Unleashed Certified Guru
- Posts: 7014
- Joined: 14 Sep 2005 19:45
- Location: Brasil, Porto Alegre
- Contact:
Re: "command not found" error on OXE
Have you done some modification on the linux? Seems you lost links
Ignorance is not the problem, the problem is the one who doesn't want to learn
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
- Konstantinos.E
- Alcatel Unleashed Certified Guru
- Posts: 616
- Joined: 12 Jan 2010 04:15
- Location: Honolulu
Re: "command not found" error on OXE
Thanks for the quick replies.
I don't make any change but I don have exclusive management (customer also administrates), so I don´t know certainly.
Is there any way to recover those links without reinstall Linux?Perhaps any knows the file missing?
On standby CS of this system the command work OK ( the issue is on main CS)
Thanks again,
M
I don't make any change but I don have exclusive management (customer also administrates), so I don´t know certainly.
Is there any way to recover those links without reinstall Linux?Perhaps any knows the file missing?
On standby CS of this system the command work OK ( the issue is on main CS)
Thanks again,
M
Re: "command not found" error on OXE
last time i had this problem because of a defective harddisk. better look for error messages in the /var/log/syslog file and try to check harddisc with the smartctl command.
also if you have 2 cs switch to the second and install the other callserver from scratch after harddiskcheck (or replacement)
regards...
also if you have 2 cs switch to the second and install the other callserver from scratch after harddiskcheck (or replacement)
regards...
--- back to basics... focus your eyes to the essential things... ---
Re: "command not found" error on OXE
Hi Tgn.
I will try you suggest.
Just for the record, we access by telnet and was successful all commands ( the issue reported was connected by V24), then we back to V24 and works fine again.So I think maybe you're right!
Many thanks!
Regards,
M
I will try you suggest.
Just for the record, we access by telnet and was successful all commands ( the issue reported was connected by V24), then we back to V24 and works fine again.So I think maybe you're right!
Many thanks!
Regards,
M