cannot install release 9.1 in CPU Appliance Server

PCInstaller, it's tricks, it's problems...
Post Reply
fahmi
Member
Posts: 18
Joined: 08 Mar 2011 04:00

cannot install release 9.1 in CPU Appliance Server

Post by fahmi »

Dear Support,

Our Customer used alcatel OXE release 9.0 and will be upgraded to release 12.0. Our customers use the IBM Appliance server. When I want to install to release 9.1, no activity happens( Stack ), I am using 80 gybyte hdd. Please help as soon as possible ...
But If i install release 11.0 is working fine.

Regards,
fahmi
alexeik
Member
Posts: 327
Joined: 26 Apr 2007 10:47
Location: Bad Oeynhausen, germany

Re: cannot install release 9.1 in CPU Appliance Server

Post by alexeik »

why do you want to install r9.1?? normally you get new appliance server when you do an upgrade to R12
imran
Member
Posts: 2
Joined: 27 May 2021 09:48

Re: cannot install release 9.1 in CPU Appliance Server

Post by imran »

Dear Support,

As i am trying to install the ESXi on Appliance Server 2G0 HP unfortunately no luck could you please guide me which version of Esxi will support for this appliance
imran
Member
Posts: 2
Joined: 27 May 2021 09:48

Re: cannot install release 9.1 in CPU Appliance Server

Post by imran »

When i try to install the esxi on my server i am getting error as Media test Failure check cable , PXE-MOF: Exiting PXE ROM i cross check in BIOS setting as the Hard disk on boot sequence number 1 could you please update me any one which rea are the settings to be done from my side

2 nd issue
I try to load from Network boot its getting error Uncompressing Linux.. OK Booting the kernel

waiting for your favorable response on this
Omni PCX enterprise Application Server 2Go HP this is the server model
Post Reply

Return to “Software Loading”