4080 IP DECT with AP300

Post Reply
User avatar
Papa_Osteel
Member
Posts: 10
Joined: 12 Apr 2013 03:44

4080 IP DECT with AP300

Post by Papa_Osteel »

Hye all,
i've got a DAP 300 nec and it worked fine until 3 days. I don't know what i did in DAP controller server but my DAP don't send any bootp or tftp message. She 's turn on (green light fixed)and she keep her old IP address (with http access and telnet).
How can "reset" the DECT Access Point ?
Can we connect throw telnet or ftp? whith witch login / password?
and what can we doing with this access?

thanks

ps: sorry for my english , i'm french... lol ;)
User avatar
Papa_Osteel
Member
Posts: 10
Joined: 12 Apr 2013 03:44

Re: 4080 IP DECT with AP300

Post by Papa_Osteel »

in fact, i want to know if it's possible to do a factory reset of the access point ? and how ?

best regards.
User avatar
Eliott
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 639
Joined: 10 Feb 2010 03:43

Re: 4080 IP DECT with AP300

Post by Eliott »

Change the flag to load the dapcfg.txt with next Boot in the DAP Configurator. (Not store on flash)
I had the same problem in my Lab but can not exactly remember the solution but I think the above one was it.
User avatar
Papa_Osteel
Member
Posts: 10
Joined: 12 Apr 2013 03:44

Re: 4080 IP DECT with AP300

Post by Papa_Osteel »

thanks
but no effect.
the AP doesn't send bootp message so no tftp upload.
The AP start like she was alone on the LAN
User avatar
MTConsulting
Member
Posts: 118
Joined: 01 Feb 2010 04:21
Location: Sydney - Innerwest

Re: 4080 IP DECT with AP300

Post by MTConsulting »

Sorry to hear you got stuck using this crappy DECT system Papa.

It is an absolute dog of a thing, if you can install real IBS DECT instead you will have 0% head aches with that.
hedebal
Member
Posts: 1
Joined: 11 Apr 2016 10:03

Re: 4080 IP DECT with AP300

Post by hedebal »

Hi everyone.
I have a NEC AP300 and I am trying to get it working on my Acatel omniPCX 10.3.13.1 through the OMC 10.3/13.1a
went to: IP Dect - DAP configurator - Misc setting, and checked that the PARI number is there.
Connected the Nec AP300 to the same Vlan as the PCX .
The Nec Ap300 comes alive with both lights flashing, the amber flash faster then the green then it goes of and come back the the Nec restart.
Can any one help, please.
Post Reply

Return to “PWT/DECT System”