OMC Command Line

Post Reply
User avatar
giovanni.attolini
Member
Posts: 276
Joined: 16 Apr 2009 13:44
Location: Veranopolis-RS-BRAZIL
Contact:

OMC Command Line

Post by giovanni.attolini »

Hi,

I know that omc.exe can be launched with some parameters like /IP=OXOIPAddress. Is there a doc that show all available parameters? Anybody knows about these omc command line parameters?

thanks
Giovanni A. Attolini
https://www.facebook.com/gio.atto

"When you make a stupid question, wait for a stupid answer!"
User avatar
giovanni.attolini
Member
Posts: 276
Joined: 16 Apr 2009 13:44
Location: Veranopolis-RS-BRAZIL
Contact:

Re: OMC Command Line

Post by giovanni.attolini »

I discovered some parameters here using a disassembler.

For example, a simple IP connection:
omc.exe /STANDALONEMODE /IP=OXOIPAddress /PASSWORD=InstallerPassword

Now I need to know how to include port info in case of NAT. I tested ":port" after IP address but not working this way.
Giovanni A. Attolini
https://www.facebook.com/gio.atto

"When you make a stupid question, wait for a stupid answer!"
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OMC Command Line

Post by cavagnaro »

O.o seems you have a lot of free time hehe
Thanks for sharing

Enviado de meu C6602 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
User avatar
cavagnaro
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 7014
Joined: 14 Sep 2005 19:45
Location: Brasil, Porto Alegre
Contact:

Re: OMC Command Line

Post by cavagnaro »

Tried ip:port?

Enviado de meu C6602 usando Tapatalk
Ignorance is not the problem, the problem is the one who doesn't want to learn

OTUC/ICS ACFE/ACSE R3.0/4.0/5.0/6.0
Certified Genesys CIV 8.5
Certified Genesys Troubleshooting 8.5
Certified Genesys BEP 8.x
Genesys Developer
User avatar
giovanni.attolini
Member
Posts: 276
Joined: 16 Apr 2009 13:44
Location: Veranopolis-RS-BRAZIL
Contact:

Re: OMC Command Line

Post by giovanni.attolini »

heheh... yes, a lot of free time...

Cavagnaro, yes, I tried but it doesn't accept this syntaxe.
Giovanni A. Attolini
https://www.facebook.com/gio.atto

"When you make a stupid question, wait for a stupid answer!"
User avatar
fe80
Member
Posts: 73
Joined: 08 Sep 2015 09:15
Location: Germany

Re: OMC Command Line

Post by fe80 »

To tell omc.exe the Port of the oxo xmlsrv you need to use the following switches:
omc.exe /IP_PBX=<your_oxo_ip_address:yourport /password=<your_installer_pw>
for example:

Code: Select all

omc.exe /IP_PBX=192.168.92.246:50443 /password=omcwoodoo
User avatar
giovanni.attolini
Member
Posts: 276
Joined: 16 Apr 2009 13:44
Location: Veranopolis-RS-BRAZIL
Contact:

Re: OMC Command Line

Post by giovanni.attolini »

It's working... Thanks...

Have you docs about omc command line?
Giovanni A. Attolini
https://www.facebook.com/gio.atto

"When you make a stupid question, wait for a stupid answer!"
User avatar
fe80
Member
Posts: 73
Joined: 08 Sep 2015 09:15
Location: Germany

Re: OMC Command Line

Post by fe80 »

Hi Giovanni,
sorry I don't have any special omc documentation. The command line options are from AST 2.3.0.1 (alcatel save tool). AST invokes omc.exe with parameters to save batches of system configs.
User avatar
giovanni.attolini
Member
Posts: 276
Joined: 16 Apr 2009 13:44
Location: Veranopolis-RS-BRAZIL
Contact:

Re: OMC Command Line

Post by giovanni.attolini »

Ok, I will look for this parameters here.

Thanks fe80!
Giovanni A. Attolini
https://www.facebook.com/gio.atto

"When you make a stupid question, wait for a stupid answer!"
Demonslayer4000
Member
Posts: 13
Joined: 13 Aug 2012 21:35
Location: Australia

Re: OMC Command Line

Post by Demonslayer4000 »

fe80 wrote: 16 Sep 2015 07:35 To tell omc.exe the Port of the oxo xmlsrv you need to use the following switches:
omc.exe /IP_PBX=<your_oxo_ip_address:yourport /password=<your_installer_pw>
for example:

Code: Select all

omc.exe /IP_PBX=192.168.92.246:50443 /password=omcwoodoo
I just wanted to say Thank you this works really well :)
OXO ACSE | OXO Trainer
Omniswitch ACFE
OXE ACFE
Post Reply

Return to “Applications”