Alcatel-Lucent 7210 Boot ROM. Copyright 2009-2012 Alcatel-Lucent. All rights reserved. All use is subject to applicable license agreements. Testing ROM load area...done Relocating code...Jumping to RAM Performing second stage RAM test....passed *** Card EEProm is not valid Bootlog started for Version C-V-5.0.R2 Build V-5.0.R2 bootrom/mpc 7xxx Built on Thu Dec 20 21:20:31 IST 2012 by builder in /home/builder/5.0B1/R2/panos/main ?Attempting to load from file cf1:/boot.tim Version L-7.0.R5, Mon Apr 20 14:09:58 IST 2015 by builder in /home/builder/7.0B1/R5/panos/main text:(5347008-->18339572) + data:(1039104-->5262104) Starting at 0xb000000... PCIe: Port 0 Link UP Total Memory: 512MB Chassis Type: sas Card Type: badami_7210 TiMOS-L-7.0.R5 boot/mpc ALCATEL SAS-D 6F4T 7210 Copyright (c) 2000-2015 Alcatel-Lucent. All rights reserved. All use subject to applicable license agreements. Built on Mon Apr 20 14:09:58 IST 2015 by builder in /home/builder/7.0B1/R5/panos/main TiMOS BOOT LOADER readRtc returned error Switching serial output to sync mode... done Looking for cf1:/bof.cfg ... OK, reading Contents of Boot Options File on cf1: primary-image cf1:\7.0R5\both.tim primary-config cf1:\new.cfg #uplinkA Port Settings: uplinkA-port 1/1/1 uplinkA-autoneg uplinkA-duplex full uplinkA-speed 1000 uplinkA-address 0 uplinkA-vlan 0 #uplinkB Port Settings: uplinkB-port 1/1/2 uplinkB-autoneg uplinkB-duplex full uplinkB-speed 1000 uplinkB-address 0 uplinkB-vlan 0 #System Settings: wait 3 persist on console-speed 115200 no console-disabled Hit a key within 1 second to change boot parameters... Configuring Network with uplinkA Port Setting..... Primary config file present at: cf1:\new.cfg Index file present at: cf1:\new.ndx Sap Index file present at: cf1:\new.sdx Primary image location: cf1:\7.0R5\both.tim Loading image cf1:\7.0R5\both.tim Version B-7.0.R5, Mon Apr 20 14:11:07 IST 2015 by builder in /home/builder/7.0B1/R5/panos/main text:(36273888-->131545080) + data:(4630752-->21719220) Executing TiMOS image at 0x100000 Total Memory: 512MB Chassis Type: sas Card Type: badami_7210 TiMOS-B-7.0.R5 both/mpc ALCATEL SAS-D 6F4T 7210 Copyright (c) 2000-2015 Alcatel-Lucent. All rights reserved. All use subject to applicable license agreements. Built on Mon Apr 20 14:11:07 IST 2015 by builder in /home/builder/7.0B1/R5/panos/main ___ ___ ___ ___ /\ \ /\__\ /\ \ /\ \ \:\ \ ___ /::| | /::\ \ /::\ \ \:\ \ /\__\ /:|:| | /:/\:\ \ /:/\:\ \ /::\ \ _\/__/ /:/|:|__|__ /:/ \:\ \ _\:\~\:\ \ /:/\:\__\ /\__\ /:/ |::::\__\ /:/__/ \:\__\ /\ \:\ \:\__\ /:/ \/__/ /:/ / \/__/~~/:/ / \:\ \ /:/ / \:\ \:\ \/__/ /:/ / /:/ / /:/ / \:\ /:/ / \:\ \:\__\ \/__/ \/__/ /:/ / \:\/:/ / \:\/:/ / /:/ / \::/ / \::/ / \/__/ \/__/ \/__/ Card eeprom invalid Resetting...OK
7210 SAS-D boot failing
-
- Member
- Posts: 1
- Joined: 07 Oct 2020 16:59
7210 SAS-D boot failing
I have a 7210 SAS-D that will not complete its boot cycle. It powers up, and I am able to console in. No matter what changes I make the switch just keeps looping through this process. I did notice there is a message saying the EEProm is not valid and I was wondering if I just have a bad switch or if I am missing something.