Running configuration : CERTIFIED

[luiz_prado]

Hi!

Alcatel-Lucent Enterprise OS6860E-P24 8.7.252.R02 GA, March 22, 2021

I copied the firmware to certified, so I leave the switches on the table for testing.
If problems appear I copied the "working" to the "certified" and returned to the old firmware.

There were no problems. I copied certified to working, and applied the command to Running configuration working. I saved and synced the "Running Configuration".

I perform the reload "hot or cold" the switch goes back to working in "Running configuration : CERTIFIED"

Because this occurs, working is identical to certified

[paulierco]

You need to copy certified to working and then: "modify running-directory working"