OS6360 - IP Phone 4028

[benoit_vannier]

Hello,

I hope any of you will have an answer to my problem (as there is not section for 6360, i ended in this part of forum).

Recently, i configured for a customer a a stack of OS6360-P48X.
This customer has an OXO with around 20 IP Phone Alcatel 4028 plugged on some 6450 switch. On this 6450, we always used "Mobile Port" for this phone without any problem.

On 6360, "Mobile port" no longer exists and we had to use UNP (based on MAC Address).
So we did some testing with UNP and met a problem.

Phone plugged on 6360, Phone 4028 boot up.
On the switch, i can see that the Port is on the good VLAN with UNP.
Phone boots up normally and connects to OXO (IP Phone up, Good number displayed).

But , few seconds later, IP Phone display "Reset... Please wait" ... and so on, reboot, reset, reboot, reset...

Anyone met this problem ?

Thanks a lot for your Help.

BV.