Problem with the PS1 port.

Post Reply
fripouille
Member
Posts: 4
Joined: 21 Oct 2011 09:51

Problem with the PS1 port.

Post by fripouille »

Hello

I have a problem with the PS1 power supply.
When I connect my external power supply to the PS1 port, the switch gives me an "UNPLUG" status. However the switch starts, but I cannot activate the POE.

If I connect the same power supply to the PS2 port, the switch gives me a "UP" status and I have no problem activating the POE.

The external power supply is an "OS6465-BPN-H-EU".
To declare it on the switch, I entered this command : "powersupply 1 name PS1 type ale HI-AC".
I don't think it's the command line that is the problem because I entered the same for the PS2 port ...

Do you think the PS1 port is faulty?

I have attached a file containing the power logs to you.

Thank you in advance for your return.

Mrs LAROUANNE L.
You do not have the required permissions to view the files attached to this post.
Tommy124
Member
Posts: 13
Joined: 02 Jul 2018 14:44

Re: Problem with the PS1 port.

Post by Tommy124 »

Hello,

When connected to PS1 port, can you run show powersupply.
as seeing the device does power on, I suspect the powersupply needs to be enabled.
powersupply enable 1 or powersupply enable chassis-id 1 1
It's been a while since I've worked with ALU switches so my apologies should there be an error in the syntax.

KR,
Tommy
Post Reply

Return to “OmniSwitch 6465”