port 25 blocked?

Post Reply
ameardith

port 25 blocked?

Post by ameardith »

Our email is sending via port 25. its always worked in the past until last week all of a sudden its stops working? is there a way to check to make sure the ports are not being blocked at the switch level?

I contacted our ISP and they verified that they are not blocking port 25 outgoing

we have 6450s poe and non poe. our core is a 6900.

i use ov2500 to manage

thanks!
cavagnaro

Re: port 25 blocked?

Post by cavagnaro »

Don't double post

Enviado de meu E6633 usando Tapatalk

silvio
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 2087
Joined: 01 Jul 2008 10:51
Location: Germany

Re: port 25 blocked?

Post by silvio »

a lot of possibilities - commands different for 6900 and 6450:
f.e. show spantree ports, show vlan ports, show vlan members, show interface status, show interface port, show violation
regards
Silvio
devnull

Re: port 25 blocked?

Post by devnull »

But RSTP or vlans would not block just smtp protocol.
It would either block all or nothing.
You could block a sinjgle port e.g. with qos rules but it should not automagically appear.

My best guess is: your ISP is lying.
Try to use submission (TCP 587) or SMTPS (TCP 465) protocol for sending - both are often supported and less likely to be blocked. You may need TLS/SSL Support or authentication for using that.
Post Reply

Return to “OmniSwitch 6450”