Does anybody have an idea, how to increase the voice level on NDDI2 board.
Voice level is very week. Either you talk from Analog set or Digital set.
Low voice level on analog trunk lines.
-
- Alcatel Unleashed Certified Guru
- Posts: 929
- Joined: 30 Jan 2006 09:40
- Location: Argentina
- Contact:
Re: Low voice level on analog trunk lines.
Hi. Go to Trunk Groups/Descend Hierchary/Trunk Group/Descend Hierchary/Trunk ... for the NDDI check the Trunk COS you are using (usually 0,1,2,or 3 for NDDI). Then go to mgr-->External Services/Trunk COS ... select the correct trunk cos, and change Line Type = Long Line. Reboot the NDDI. Check if it works. regards.
ACSE R11
OT R2.0
OT R2.0
Re: Low voice level on analog trunk lines.
Thanks. I tried the same, it improve somehow but still not acceptable.
Any other suggestions.
Any other suggestions.
Re: Low voice level on analog trunk lines.
Go To MGR >Trunk Group >D/H> Trunk group > R/M> select the trunk group number> ctrl+v
Change Use of volume in system from +YES to +NO
increase the Local Volume (dB) : 3/6/9
Change Use of volume in system from +YES to +NO
increase the Local Volume (dB) : 3/6/9