INT-IP2 Card doesn't work result of core-switch upgrade

[jjean]

Hello !

I have questions about INT-IP2 card.

I am currently replacing my core switch from Cisco WS-C6506-E to Cisco WS-C3850-48T.
Then I have to migrate my Alcatel 4400 Int-IP2 card.
I copy-pasted the interface configuration from old to new L3-Switch. With speed 100, full duplex and the right VLAN.
I tried with a PC in the right vlan on these interface. I can ping it and I can see the @MAC on the interface.
But when I migrate the interface, I lose my ping and I don't see any mac address. But the led IP on card blink green.

My provider tells me that there is some incompatibility between INT-IP2 card and new Cisco Switches.
So I tried with : WS-C2960X-48LPS-L and WS-C2960-8TC-L

And now my provider want to sell me INT-IP3 cards overpriced.

Do you know if there is real compatibility issues between thoses equipments ?
Maybe I've something to do on my INT-IP2 card to make it work ?

I'm at your disposal if you need further information.

Best regards,
JJEAN

[haroun]

My provider tells me that there is some incompatibility between INT-IP2 card and new Cisco Switches.

And now my provider want to sell me INT-IP3 cards overpriced.


Best regards,
JJEAN

iN THIS CASE ur provider should proof it by a TC or any other doc FROM ALE stating for that incompatibility

[jjean]

Hello Haroun,

First, thank you for your reply.
The way they said it, I'm pretty sure they do not have any proof of it.
If I don't find any problem, I'll ask them to give me that proof.

BR
JJEAN

[vad]

For INT-IP start you need to have communication between INT-IP and CPU.
So, for you interested not only INT-IP connection but CPU too.
Do you have some incident about INT-IP start?

[jjean]

Hello Vad,

I don't have any problem to start when I'm plugged in my old switch L3.

[vad]

It's clear (about old switch). I just want to say - you need to configure not only INT-IP2 port but CPU port too.