Hi, my name is Sérgio
I am currently trying to solve a problem with making DDI calls, the issue of releasing DDI calls has already been reviewed with the operator and they are saying that the release of this type of call has already been made, I would like to know how I can configure the Public Network Category, because none of the ones I'm using is performing DDI connection, could someone help me?
DDI setup to make calls
Re: DDI setup to make calls
Try using Direct Trunk Seize.
Set "Number Compatible With = -1" and configure the "No of Digits to send" in your Trunk Group settings. No of Digits should be the maximum number of digits of called numbers.
Once you confirmed the trunk is working, then you can move to ARS and Discriminator tables.
Set "Number Compatible With = -1" and configure the "No of Digits to send" in your Trunk Group settings. No of Digits should be the maximum number of digits of called numbers.
Once you confirmed the trunk is working, then you can move to ARS and Discriminator tables.
Every adversity has within it a seed of an equivalent or greater benefit....
Re: DDI setup to make calls
We talk about OXO or OXE?
Re: DDI setup to make calls
Good question Vad.
Sergio, my reply above is for OXE.
Sergio, my reply above is for OXE.
Every adversity has within it a seed of an equivalent or greater benefit....