VLAN Assignment for IPPhones

[olaftt]

Hello,
has someone a running config for VLAN Assignment of IPPhones with a OS2360-P48X? We tried all configuration for example from a OS6560 or older AOS6 Switches but nothing work.

My configuration:

! DA-UNP:
unp profile "VOICE_CLIENTS"
unp profile "PC-CLIENTS-Haus63a"
unp profile "VOICE_CLIENTS" map vlan 14
unp profile "PC-CLIENTS-Haus63a" map vlan 11
unp port-template TEMPLATE_HAUS63a direction both default-profile "PC-CLIENTS-Haus63a" classification ap-mode admin-state enable
unp port 1/1/1-31 port-type bridge
unp port 1/1/1-31 port-template TEMPLATE_HAUS63a
unp classification lldp med-endpoint ip-phone profile1 "VOICE_CLIENTS"

! QOS:
policy mac group alaPhones 00:90:33:00:00:00 00:90:33:FF:FF:FF
qos apply

! LLDP:
lldp network-policy 1 application voice vlan 14 l2-priority 5 dscp 46
lldp network-policy 2 application voice-signaling vlan 14 l2-priority 0 dscp 30
lldp nearest-bridge port 1/1/1-31 tlv med ext-power-via-mdi enable
lldp nearest-bridge port 1/1/1-31 tlv med network-policy enable
lldp nearest-bridge port 1/1/1-31 tlv med capability enable
lldp port 1/1/1 med network-policy 1
lldp port 1/1/1 med network-policy 2
lldp port 1/1/2 med network-policy 1
lldp port 1/1/2 med network-policy 2
lldp port 1/1/3 med network-policy 1
lldp port 1/1/3 med network-policy 2
lldp port 1/1/4 med network-policy 1
lldp port 1/1/4 med network-policy 2
lldp port 1/1/5 med network-policy 1
lldp port 1/1/5 med network-policy 2
lldp port 1/1/6 med network-policy 1
lldp port 1/1/6 med network-policy 2
lldp port 1/1/7 med network-policy 1
lldp port 1/1/7 med network-policy 2
lldp port 1/1/8 med network-policy 1
lldp port 1/1/8 med network-policy 2
lldp port 1/1/9 med network-policy 1
lldp port 1/1/9 med network-policy 2
lldp port 1/1/10 med network-policy 1
lldp port 1/1/10 med network-policy 2
lldp port 1/1/11 med network-policy 1
lldp port 1/1/11 med network-policy 2
lldp port 1/1/12 med network-policy 1
lldp port 1/1/12 med network-policy 2
lldp port 1/1/13 med network-policy 1
lldp port 1/1/13 med network-policy 2
lldp port 1/1/14 med network-policy 1
lldp port 1/1/14 med network-policy 2
lldp port 1/1/15 med network-policy 1
lldp port 1/1/15 med network-policy 2
lldp port 1/1/16 med network-policy 1
lldp port 1/1/16 med network-policy 2
lldp port 1/1/17 med network-policy 1
lldp port 1/1/17 med network-policy 2
lldp port 1/1/18 med network-policy 1
lldp port 1/1/18 med network-policy 2
lldp port 1/1/19 med network-policy 1
lldp port 1/1/19 med network-policy 2
lldp port 1/1/20 med network-policy 1
lldp port 1/1/20 med network-policy 2
lldp port 1/1/21 med network-policy 1
lldp port 1/1/21 med network-policy 2
lldp port 1/1/22 med network-policy 1
lldp port 1/1/22 med network-policy 2
lldp port 1/1/23 med network-policy 1
lldp port 1/1/23 med network-policy 2
lldp port 1/1/24 med network-policy 1
lldp port 1/1/24 med network-policy 2
lldp port 1/1/25 med network-policy 1
lldp port 1/1/25 med network-policy 2
lldp port 1/1/26 med network-policy 1
lldp port 1/1/26 med network-policy 2
lldp port 1/1/27 med network-policy 1
lldp port 1/1/27 med network-policy 2
lldp port 1/1/28 med network-policy 1
lldp port 1/1/28 med network-policy 2
lldp port 1/1/29 med network-policy 1
lldp port 1/1/29 med network-policy 2
lldp port 1/1/30 med network-policy 1
lldp port 1/1/30 med network-policy 2
lldp port 1/1/31 med network-policy 1
lldp port 1/1/31 med network-policy 2

The Switch put the Phones in the correct VLAN:

sw-keller-haus63a-> show unp user
User
Port Username Mac address IP Vlan Profile Type Status
-------+--------------------+-----------------+---------------+----+--------------------------------+------------+-----------
1/1/7 48:7a:55:13:a8:6b 48:7a:55:13:a8:6b 192.168.41.110 14 VOICE_CLIENTS Bridge Active
1/1/16 00:90:33:51:80:4e 00:90:33:51:80:4e - 14 VOICE_CLIENTS Bridge Active

But there is no communication possible.

sw-keller-haus63a-> show vlan members port 1/1/16
vlan type status
--------+-----------+---------------
1 default forwarding
14 unpUntag forwarding

sw-keller-haus63a-> show vlan members port 1/1/16
vlan type status
--------+-----------+---------------
1 default forwarding
11 unpUntag forwarding
14 unpQtag forwarding

I Thing the problem is the missing mobile function in the switch. But is there an work around?

[olaftt]

I deactive the unp function and with lldp-med the vlan assignment works.
Than I will wait for the next release and try unp again...

[silvio]

not tested it yet with the websmart switches. But with your config for lldp you need at the voice profiles the mobile-tag enabled.
best regards
Silvio

[zepeki]

Hello,

I'm replying to this forum because I'm trying to get the LLDP MED to work with an OS6360. Here is my LLDP configuration:

lldp network-policy 1 application voice vlan 2 l2-priority 5 dscp 46
lldp port 1/1/28 med network-policy 1
lldp port 1/1/29 med network-policy 1
lldp port 1/1/30 med network-policy 1
lldp port 1/1/31 med network-policy 1
lldp port 1/1/32 med network-policy 1
lldp port 1/1/33 med network-policy 1
lldp port 1/1/34 med network-policy 1
lldp port 1/1/35 med network-policy 1
lldp port 1/1/36 med network-policy 1
lldp port 1/1/37 med network-policy 1
lldp port 1/1/38 med network-policy 1
lldp port 1/1/39 med network-policy 1
lldp port 1/1/40 med network-policy 1
lldp port 1/1/41 med network-policy 1
lldp port 1/1/42 med network-policy 1
lldp port 1/1/43 med network-policy 1
lldp port 1/1/44 med network-policy 1
lldp port 1/1/45 med network-policy 1
lldp port 1/1/46 med network-policy 1
lldp port 1/1/47 med network-policy 1
lldp port 1/1/48 med network-policy 1

My voice vlan is 2. My ports are in default port in vlan 10 and tag in vlan 2. Do I need to add something in the LLDP configuration so that the station assigns itself vlan 2 automatically?
Thank you in advance for your answers,
Zepeki

[bratsonis]

Hello all,

I'm also trying to assign vlan through lldp but failing.

OS2260 after reset and only apply this configuration

vlan 1 name default 
vlan 3 name voip 
vlan 4 name others 
vlan 3 members port 1/1/1 tagged 
vlan 4 members port 1/1/1 tagged 
lldp network-policy 1 application voice vlan 3 
lldp network-policy 1 application voice-signaling vlan 3 
lldp port 1/1/2-24 med network-policy 1 
lldp nearest-bridge port 1/1/2-24 tlv med network-policy enable 
lldp nearest-bridge port 1/1/2-24 tlv med capability enable 
unp profile voip 
unp profile data 
unp profile voip map vlan 3 
unp profile data map vlan 4 
unp port-template datatemplate default-profile data classification admin-state enable 
unp port 1/1/2-24 port-type bridge 
unp port 1/1/2-24 port-template datatemplate 
unp classification lldp med-endpoint ip-phone profile1 voip 

vlan 1 is management
vlan 2 is for voip phones and receives ip addresses from range 192.168.50.0/24
vlan 3 is for computers and receives ip addresses from range 192.168.51.0/24

So after the configuration is done and port 1 is connected to the router that is also the dhcp server then from ports 2 of the switch we connect an ip phone and it correctly gets an ip address from 192.168.50.0/24 which is correct. Then we connect a computer at port 6 and it gets correctly from 192.168.51.0/24. All works correctly. The ports numbers are random ranging from 1/1/2-1/1/24

But after that if i remove the ip phone from its connected port and connect it again on the same or any other port from the range 1/1/2-1/1/24 it will never again take ip address from the 192.168.50.0/24 range it will always take from 192.168.51.0/24

I need to reset the switch and reconfigure to assing the ip address but only for the first connection.

What could be the cause?

Thank you

[silvio]

I know that there are limitations with the cheapest omniswitch OS2260 and UNP - but not sure about the lldp classification.
But with your config the phone will send tagged packets within vlan 3. In switches with AOS R8 you need to allow mobile-tag at the unp profile. But this is not supported in the 2260/2360.
In the KB of ALE I find the same question and the same config like in your example. So you should open a ticket at ALE.
What are the results of "show unp user" "show unp user details" and "show vlan members port 1/1/x" in case of the issue?
BR Silvio