hello everyone
I have a number of switches running 8.6.203.R02 that are already configured with snmp v3 and working fine
I am trying to add snmp v2 community without removing the V3 configuration.
Could someone please confirm this is possible on Alcatel switches ?
Currently I am getting these errors when I try with v2:
Error in packet.
Reason: authorizationError (access denied to that object)
Failed object: iso.3.6.1.2.1
Thanks
configuring snmp V3 and V2 on Omniswitch at the same time
Re: configuring snmp V3 and V2 on Omniswitch at the same time
I found the way to configure V2 and V3 together, from the OmniSwitch CLI Reference Guide the command I need in my particular case is:
"snmp security authentication set"
no security The switch will accept all SNMP v1, v2, and v3 requests.
authentication set The switch will accept all requests except v1, v2, and non-authenticated
v3 set requests. SNMP v1, v2, and non-authenticated v3 set requests
will be rejected.
authentication all The switch will accept all requests except v1, v2, and non-authenticated
v3 get, get-next, and set requests. SNMP v1, v2, and non-authenticated
v3 get, get-next, and set requests will be rejected.
privacy set The switch will accept only authenticated SNMP v3 get, get-next and
encrypted v3 set requests. All other requests will be rejected.
privacy all The switch will accept only encrypted v3 get, get-next, and set requests.
All other requests will be rejected.
trap only All SNMP get, get-next, and set requests will be rejected.
"snmp security authentication set"
no security The switch will accept all SNMP v1, v2, and v3 requests.
authentication set The switch will accept all requests except v1, v2, and non-authenticated
v3 set requests. SNMP v1, v2, and non-authenticated v3 set requests
will be rejected.
authentication all The switch will accept all requests except v1, v2, and non-authenticated
v3 get, get-next, and set requests. SNMP v1, v2, and non-authenticated
v3 get, get-next, and set requests will be rejected.
privacy set The switch will accept only authenticated SNMP v3 get, get-next and
encrypted v3 set requests. All other requests will be rejected.
privacy all The switch will accept only encrypted v3 get, get-next, and set requests.
All other requests will be rejected.
trap only All SNMP get, get-next, and set requests will be rejected.