4059 IP Attendant SBC SESSION-L3OPEN, l2 protocol init failed message

[khchaneric]

Hi guys,

I've the issue on 4059EE connection recently. The 4059 are not able to connect with the error message "OmniPCX Communication failure: SS_SBC SESSION-L3OPEN, l2 protocol init". But when we swap the role of the CPU (e.g. Main> Standby and Standby > Main). It works fine.


No issue of IPDesktopSoftphone in both CPU

We did power recycle of the issued CPU but no hope.

Would you please advise any clues?


Log of 4059EE
=============================
ABCACom32 DebugFile - date: 22/05/23 - 18:48:20 (37250046 ms)
ABCACom32 Version:7.2.5.0

OutputTraceMode:0

GetFreeAbcaComIDByFile - ReadBuffer 0x00000000000000fb\r\n0x0000000000000000\n !
GetFreeAbcaComIDByFile - strMaskIDL 0x00000000000000fb\r !
GetFreeAbcaComIDByFile - strMaskIDH 0x0000000000000000\n !
GetFreeAbcaComIDByFile - MaskID:0x00000000000000ff\r\n0x0000000000000000\n - ID:2 !
ERROR:37250121 tftp : connection failed...
ERROR:37250445 tftp : connection failed...
ERROR:37250771 tftp : connection failed...
ERROR:37251080 [st]: Opened l3prot = IP link failed
ERROR:37251080 ABCA_IF: L2 UAUDP Protocol Init (TFTP main) Failed
ERROR:37251080 [st]: Opened l3prot = IP link failed
ERROR:37251080 ABCA_IF: L2 UAUDP Protocol Init (TFTP op1) Failed
ERROR:37251080 [st]: Opened l3prot = IP link failed
ERROR:37251080 ABCA_IF: L2 UAUDP Protocol Init (TFTP op2) Failed
ERROR:37252096 l3_close_session_req (session:6, access:2d47f60)
ERROR:37252096 Supression objet from access (access:2d47f60)

============================

[haroun]

see tis thread same isuue , may you pc firewall is the root

https://www.alcatelunleashed.com/viewtopic.php?t=28736