I've done some test with 2 ALE 6360 and virtual chassis. I've reset configuration on slave, now it is not member of VC.
I would like to remove old slave from VC. Topology still displays old member as "Unassigned Not-Joined"
What is the proper way to remove old slave from VC ? I tried changing chassis-group number and reboot but without luck.
Code: Select all
-> show system
System:
Description: Alcatel-Lucent Enterprise OS6360-P24 8.8.56.R02 GA, April 02, 2022.,
Object ID: 1.3.6.1.4.1.6486.801.1.1.2.1.16.1.5,
Up Time: 1 days 3 hours 57 minutes and 57 seconds,
Contact: Alcatel-Lucent Enterprise, https://www.al-enterprise.com,
Name: MYNAME,
Location: Unknown,
Services: 78,
Date & Time: SAT OCT 29 2022 12:05:07 (UTC)
Flash Space:
Primary CMM:
Available (bytes): 728911872,
Comments : None
-> cat working/vcsetup.cfg
!========================================!
! File: /flash/working/vcsetup.cfg !
!========================================!
! Virtual Chassis Manager:
virtual-chassis chassis-id 1 configured-chassis-id 1
virtual-chassis vf-link-mode auto
virtual-chassis auto-vf-link-port 1/1/28
virtual-chassis chassis-id 1 chassis-group 16
virtual-chassis chassis-id 1 configured-chassis-priority 255
!
! PLEASE DO NOT MODIFY THE AREAS OF [SAVED INFO xxx]
! [SAVED INFO VC IDs] 3
!
! IP:
-> show virtual-chassis topology
Legend: Status suffix "+" means an added unit after last saved topology
Local Chassis: 1
Oper Config Oper
Chas Role Status Chas ID Pri Group MAC-Address
-----+------------+-------------------+--------+-----+------+------------------
1 Master Running 1 255 16 94:24:e1:f5:9e:a5
- Unassigned Not-Joined 2 - - -
Regards
