4635J boots into Linux partition and not into VM application

[tgn_DUP]

VPx35 login: (here I know commands reboot and swinst)

mtcl is possible too, but gives not much satisfaction.

From Alcatel told me that the option to Boot menu doesn´t appear because I am using the "red" cable and not the "black" cable. As tot3nkopf wrote, I am don´t have expierence with 4635. So I want to know if is it possible that this cables gives different information.

yes this cables gives different information.
- red cable is linux console
- black cable is the manager menu.

and sorry i haven't much expierience in some things too (for instance "reading the >Alcatel Unleashed Certified Guru< - logo" ).
please don't missunderstood... i'll only help a little bit.
regards...

[tincho.rn]

Don´t worry, I don´t missunderstand you tgn. About the topic, If you want to help a little bit...can you tell me what this means (from Offline tools, Logs)

*** Possible Bad Hardware
>>> NOTIFY SUPPORT REPRESENTATIVE
00000 14009002 5800FF02 FFFF01FE AD680100 *....X........h..*
00010 00006000 *..`. *

thanks. regards.

[tgn_DUP]

*** Possible Bad Hardware
>>> NOTIFY SUPPORT REPRESENTATIVE
00000 14009002 5800FF02 FFFF01FE AD680100 *....X........h..*
00010 00006000 *..`.

may be that someone has installed the false binary for this hardware.
this is out of the tc0954

Code: Select all

8.3. Loading the CPU 4635
When loading a version, the type of hardware is detected automatically:
1 – H2 (for a VPM35 board)
2 - J (for a VPS35 board)
3 – V (for a VPU5 or VPU6 board)
The VPU5 board replaces the VPS35 board. The voice mail system equipped with the VPU5 board
has Junior as name (as the VPS35).
The VPU6 board replaces the VPU5 board. It has the same characteristics but is compliant ROHS.
During the loading, the 3- V option must be enabled.
If the 2 – J option is enabled, the loading is carried out correctly but the board
does not restart.

may be the hardware is defect or installation on hd is for another hardware.
who has installed the software on hd? came it from alcatel?
for testing the hardware, i commend a new installation of software 5.4.0 on a fresh harddisk.

regards...

[tincho.rn]

Yes tgn. You have the answer. I found out that the release installed is 5.2.0 and for OXE R8.0 must be from 5.3.1. So I will do a fresh install with 5.4.0. I hope this will solve the problem. After fresh install I will feedback if it was the solution. Thanks people ,as always, for your help. Regards.

[tincho.rn]

Finally...the solution was to do a fresh install with the lastest release. Thanks againg. Regards.