i have a problem with an OXE 7.1 and a 4635.
I have installed much of them but never i get an error like this, has anyone see it before and solve it of course
Here i attach the boot sequence:
ALCATEL - VPU5 - BIOS
Version: 4.04T Date: Feb 08, 2002 13:35:08
(C) Copyright Alcatel Austria A.G. 2000
CPU Type is SC520 Rev 11 running at 100 MHz
<SPACE> to Skip Memory Test, <DEL> for BIOS Setup
Total DRAM is 65536K
Alcatel 4635
Prom Resident Test Demon, Integrated Version
Board Self-Test Status:
CPU Test........................................... PASSED
Console Test....................................... PASSED
Data/Stack RAM Test................................ PASSED
Scrubbing all "known" DRAM memory ..... (00000000-04000000)
Timer Test......................................... PASSED
Copyright 1994-2000 Alcatel Austria A.G.
System CPU PROM Version: e104VPU5 (Oct 29, 2001 14:26:13)
Board Type is: VPU5
VP_DIAG: RUN *
Display (But NOT Execute) Self-Test Status......... (00) PASSED
DRAM Walking 1s DWORD Test......................... (33) PASSED
DRAM 3Par DWORD Test Executed From DRAM............ (7D) PASSED
Write/Verify Misc Registers........................ (2F) PASSED
Ethernet Test...................................... (74) PASSED
IPoC Controller Test............................... (4A) PASSED
IDE Disk Configuration............................. (50) STARTED
.X
IDE Disk Configuration............................. (50) PASSED
IDE Disk Drive Diagnostic.......................... (4D) PASSED
IDE Disk Read Test................................. (4E) PASSED
Crystal-1 Chip Test................................ (56) PASSED
C67 DSP Functional Test............................ (20) PASSED
Watch Dog Timer.................................... (5F) PASSED
Please select from the following:
B Boot the System
^DB Boot the System (clear autoboot, set SRAM=0xFF)
^DD Run Diagnostics Interactively
Selection->
No response...
- Beginning OS BOOT process
[4635J] Initial Program Load Phase 1 (IPL1) Begins
Scrubbing all "known" DRAM memory ..... (00000000-04000000)
WARNING !! RESETTING and RESTARTING VPU5 Board, due to:
"Failed IPL Sequence"
(initiated by "ci module")
Thank's a lot.
