Routing table on OXO r7

[azhar]

Hello,

i would like to know whether the OXO can be made the default gateway for itself and IP phones and use the routing table as a means to reach other routers on the network.

i want to use this configuration because i have two routers on the same network and to which the OXO needs to communication; one is being used to reach remote IP extensions (10.20.1.1) and the other is used to connection to the SIP trunks. Though connection to the SIP trunks are OK, we are having one way speech on the VPN/remote IP extensions; we can hear them but they cannot hear us.

can the OXO do routing and can that routing table be used for devices other than the OXO itself.

many thanks.

Azhar

[steve]

I have never done it, but there is a routing table in the OMC.
I hope this feature is need for you

U can find it in the Hardware and Limits / IP Configuration / Routing menu.

[krzysioD]

As long as you need basic static gatways for given network, it working.

OXO lacks capability of dynamic routing (OSPF etc).