My Teamwork routing tables

Post Reply
User avatar
Heimo
Member
Posts: 10
Joined: 21 May 2007 14:39

My Teamwork routing tables

Post by Heimo »

In a new myT new installation I couldn't reach internet (nor LAN network) from VMware Win XP machine. So MSOffice is not able to be activated. I couldn't do a ping from VMware Win XP machine either.

Using System Commands options from MyT Web Admin page, I've seen the vmnet1 interface is not using a right gateway address (it should be i think 192.168.254.1 which corresponds to default gateway inside to WIN XP Vmachine)

I'm using the default values for Collaboration Subnet (192.168.254.0) and my LAN subnet is 192.168.1.0/24

Do you know if is possible to configure vmnet1 Gateway?



Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface MSS Window irtt
10.254.254.0 * 255.255.255.0 U 0 0 0 eth1 0 0 0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 0 0 0
192.168.254.0 * 255.255.255.0 U 0 0 0 vmnet1 0 0 0
169.254.0.0 * 255.255.0.0 U 0 0 0 eth1 0 0 0
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 0 0 0
cavagnaro

Re: My Teamwork routing tables

Post by cavagnaro »

You must do an activation via phone call.
banfield

Re: My Teamwork routing tables

Post by banfield »

Is the server public on DMZ or nat?
User avatar
Heimo
Member
Posts: 10
Joined: 21 May 2007 14:39

Re: My Teamwork routing tables

Post by Heimo »

MyT is on NAT, however I've tested locally over LAN and it is the same.
cavagnaro

Re: My Teamwork routing tables

Post by cavagnaro »

The VMWare in TW is configured for Host only, if you want it to go to Internet have to modify VMWare ethernet configuration.
Post Reply

Return to “GENERAL”