How to retreive the accouting files via IP/X25.

abbas · Post by **abbas** » 28 Jun 2006 13:44

I need to configure the 4760 for three network nodes over IP.
I am unable to configure the remote node on IP/X25 for billing and management purpose.

When try to connect or synchronize , it says wrong IP connection.

Post by **frank** » 28 Jun 2006 22:31

Isn't it a license for the number of nodes you can manage in the 4760 ?

alex · Post by **alex** » 03 Jul 2006 02:02

There is no node number license for 4760.
You have only one node "glued" to 4760.
For a network of PABX' 4760 counts a total number of users in Technical Directory.
From the other point you need 47XX SW keys to be opened in all PABX' managed by 4760.

Post by **frank** » 03 Jul 2006 09:50

I never saw "Wrong IP connection" as an error message..
This is all it says !?

Post by **oldboy** » 03 Jul 2006 21:03

What about the adfexc password has this been changed in the system??? This will stop you from conecting to the system via 4760

Post by **frank** » 03 Jul 2006 21:26

Well.. then it should not say wrong IP address, but "cannot connect" or "bad username/password" ...

Post by **oldboy** » 04 Jul 2006 02:11

Incorrect if the adfexc password is incorrect or has been entered wrong, it will stop it from working...as a test go to cmd prompt type ftp ip address of the system and then login adfexc and password adfexc and see what happens!!!!!

alex · Post by **alex** » 04 Jul 2006 05:47

Abbas,
First make it clear.
Remote nodes are connected to 4760 via IP (LAN) or via IP/X25 tunnel (ABC_F links)?