Recommend VLAN Switch that works well Alcatel IP Touch set

niko · Post by **niko** » 09 Aug 2006 16:04

Hello

I would like to buy some backend infrastructure which will accomodate the IP PBX and phone sets. The majority of the phone sets will be Alcatel IP Touch 4038, 4068 used in conjuction with an OXE enterprise 6.1.

Major criterias that I will use for buying these switches are:

1. High Availability (if one switch fails then the second one takes over)
2. PoE
3. QoS
4. VLAN
5. Would be nice to have some sort of ACL i.e. allow/block certain MAC addresses, or even control multicast and broadcast traffic eceterera.

If someone has any recomendation please feel free to share it with me

Thanks Niko

Post by **frank** » 12 Aug 2006 21:24

You can get an OXE with dual CPUS for redundancy.
You will have QoS, VLAN, I guess PoE, and you can set the IP security to deny some mac addresses.. Or better, force a mac address for an extension.

Steveo · Post by **Steveo** » 16 Aug 2006 20:06

I just installed about 100 â€œAlcatel OmniSwitch 6850 POE Stackable layer 3â€

niko · Post by **niko** » 22 Aug 2006 17:31

frank wrote:You can get an OXE with dual CPUS for redundancy.
You will have QoS, VLAN, I guess PoE, and you can set the IP security to deny some mac addresses.. Or better, force a mac address for an extension.

Thanks.

niko · Post by **niko** » 22 Aug 2006 17:31

[quote="Steveo"]I just installed about 100 â€œAlcatel OmniSwitch 6850 POE Stackable layer 3â€