Resend DTMF

marlon74ph · Post by **marlon74ph** » 10 Nov 2006 02:49

Hi, im just new here, hope you could help me
i have an oxo rel 4.1, when i call outside from my oxo and Auto attendant answers from terminating end, im still dialing key (in my case #), if no dialed # my call will not go to any desired extesion (terminating) dialed.

thanks,

rombz

cavagnaro · Post by **cavagnaro** » 10 Nov 2006 12:53

It is supposed to work in that way as your terminal has multilines, the idea is that in hot you dial a second extension without pressing another button.
Not sure if in OXO you can say to the trunk to be Auto DTMF when using that trunk.

steve · Post by **steve** » 13 Nov 2006 03:29

Activate the MF transparency box in the Subscriber/Detalais/Features part2 side. If this box is checked the set will work in DTMF mode automatically after the call connect.

In this mode, if you want to put a call holding, or transfer it, you must deactivate the MF transparency

marlon74ph · Post by **marlon74ph** » 13 Nov 2006 04:06

steve/cavagnaro

thanks....

mpr

Isa · Post by **Isa** » 07 Dec 2006 11:58

I've got a similar issue to stablish conferencez over the new VOIP trunks.

If I dial the first station, the DMFT is automatic, so if I want to call the 2nd extension I have to press Enquiry and then the other number.
But then, when I press 3 to establish the third-party conference between the 2 numbers, I canot do it. In the display still says MF and then appears the number I dial.

How can I terminate the DTMF during a call?

Post by **tot3nkopf** » 07 Dec 2006 16:13

It is a system constraint when using DTMF end to end dialing - you cannot establish conferences (probably becouse you use inband signalling).

steve · Post by **steve** » 12 Dec 2006 01:32

Hi Isa,

In this case You need a conference key on the digital set.

Key type: Feature key
Keyfunction: Conference

Post by **frank** » 12 Dec 2006 08:30

This was a difference between Europe and USA.
In the USA, they want you to push a 2nd line before you can make another call (if you initiated the first call). This is because if you call some company for example (Alcatel), and they ask you to press 1 to talk to someone, then the system has no clue if you want to send DTMF or dial your friend's extension who starts with 1. This is why you setup the DTMF at the end of the call in the trunk group. By default, to get out of this, you have to seize a new line, and dial #4

Isa · Post by **Isa** » 18 Jan 2007 11:59

Thanks tyo all

I resolved this issue, by setting the DTMD button in all sets and set the VOIP trunk to no send DTMF automatically