Named Pipe TCP Proxy

cavagnaro · Post by **cavagnaro** » 07 Feb 2007 18:13

Hi, i have installed my OXE 7.1

but when using this software Named Pipe TCP Proxy i always get a double ENTER input and then i can't use swinst.
Any idea why or how to use the other VMware Named Pipe to TCP Gateway?

alcatelboy · Post by **alcatelboy** » 09 Feb 2007 12:39

don't use the windows's command 'telnet' tools to telnet the ip address;

you can try to use the other tools, such as procomm plus .

cavagnaro · Post by **cavagnaro** » 09 Feb 2007 13:06

Worked! Thanks, even Putty failed here :S

Post by **tot3nkopf** » 13 Feb 2007 08:06

Windows Hyper Terminal works just fine, too.

alurfe · Post by **alurfe** » 14 Feb 2007 03:40

i've installed OXE rel. 6.0.1, and i use Putty 0.58 and it work fine.
I think this is a configuration problem on Putty.

best regards

alurfe · Post by **alurfe** » 14 Feb 2007 05:38

on putty, under connection/telnet don't flag "Return key sends Telnet New Line instead of ^M"

Best Regards

cavagnaro · Post by **cavagnaro** » 15 Feb 2007 13:43

great worked! =)

luckyme2 · Post by **luckyme2** » 02 May 2007 05:20

or when using windows Telnet press CTRL+J instead of ENTER.

A+
lm2