Change NDDI binary version ???

[doublevand981]

Hi All,
My OXE system using :
Delivery software version : g1.503 ;
Patch version : 17 ;
Dynamic patch version : b ;

MAO software version : G1.503 ;
Software Version Name : R8.0.1 ;

now i faced problem with NDDI2 trunk boards, i hang on (out service) after some days frequency (i had to plug out the board and plug in for inservice the boards).
below is incedents i saw:
3781=Problem 1 for DSP on card NDDI2
3517=Coupler memory exhausted
Any pro advise me best solution for this case ?

i intend to upgrade system and NDDI2 binary version . but i wonder if i get NDDI2 binary from Relese 9.0 ( ver 2.21) and upload to R.8.0.1 its OK or NOT

thanks

[alex]

Why not first install the latest patch from 8.0.1? It is something like g1.503.35.k available on BPWS.

[doublevand981]

thanks
i will upgarde to lastest Release 8.0.1 first and then use nddi2 binary ver 2.22 from Release 9.0 to upload to system.