Call Drops after 2 or 3 minutes using analog trunks

[enrique.man]

Hello guys,

I got 2 OXOs, one with release 5 and the other with release 8, both in the last patch and i am getting the same problem.

When a call is established using the analog trunks, after 2 or 3 minutes the call drops. It doesnt matter if i received the call or i dial the call, the call drops
suddenly and the call needs to be established again.

Hope somebody can help.

Regards
Enrique

[tot3nkopf]

Disable busy tone detection.

[enrique.man]

Hi tot3nkopf,

Thanks for the info, i've already done that, and it works for a while , lets say 3 days and again the issue comes out. Do you think it has to do with the lables in the memory read/write flags?

Regards
Enrique

[tot3nkopf]

BTDMaxWOff
BTDMaxWOn
BTDMinWOff
BTDMinWOn
BuTSiDtPar
MinBusySeq

You must configure these to match busy tone provided by telco.

[enrique.man]

Hi Tot3nkopf,

You mean i should contact my telecommunications operator to match these values right?

Regards
Enrique

[tot3nkopf]

Hi Tot3nkopf,

You mean i should contact my telecommunications operator to match these values right?

Regards
Enrique

Yes. Usually they don not know them themselves. It is very hard to determine them otherwise. I think krzysioD has some post with a method with some SIP trunk, recording the tone and analyzing it. never did some thing. You should search for this.

[enrique.man]

Thanks tot3nkopf,

I'll take a look at it. Let you know if everything goes fine.

Regards
Enrique