hi Jhonku, sorry for the delay in getting back to you. did you find the issue yet?
if not I assume you have checked the settings that Cav said about also please check domains configuration. a 480 message is normally returned when the invite has incorrect/incompatable information. in the case of a seplos extn it can be due to featues etc. have you tried setting the phone as a sip device?
SIP Phone on OXE 9.1
Re: SIP Phone on OXE 9.1
Best Regards
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
Murray
ACSE 10.0 corporate
ACSE 6.x IPT data
- Konstantinos.E
- Alcatel Unleashed Certified Guru

- Posts: 616
- Joined: 12 Jan 2010 04:15
- Location: Honolulu
Re: SIP Phone on OXE 9.1
hi
i would like to return to a question that tot3nkopf maked..what kind of comps do you use? what kind of hardware you have?common or crystal?
i would like to return to a question that tot3nkopf maked..what kind of comps do you use? what kind of hardware you have?common or crystal?
Alca_holic
Re: SIP Phone on OXE 9.1
Hi,
I am facing a similar issue here, I am using Bria Apps on my iTouch, all incoming and outgoing calls working fine. Problem happened when I called a forwarded extension by dialling the extension number, the call will drop after dialling. For the same extension, if I tried calling with the DDI numbers, the call went thru.
Still try to find what is the problem.
Anyone can share
Thank you
Kiacanto
I am facing a similar issue here, I am using Bria Apps on my iTouch, all incoming and outgoing calls working fine. Problem happened when I called a forwarded extension by dialling the extension number, the call will drop after dialling. For the same extension, if I tried calling with the DDI numbers, the call went thru.
Still try to find what is the problem.
Anyone can share
Thank you
Kiacanto
-
prasanna_s3
Re: SIP Phone on OXE 9.1
could you please checkwiht ip domain - without compress for inter and extra domain....
-
pankajchauhan
Re: SIP Phone on OXE 9.1
just increase the number of digits in discrimnator rule and incraese it more then your requirement.
Like if your outgoing no is 10 digits then increase it as 16
it will work.
Pankaj
Like if your outgoing no is 10 digits then increase it as 16
it will work.
Pankaj
