QoS log

[chithanhg0002097]

Hi
I have issue with qos log. When I ping local LAN (10.18.31.16 to 10.18.31.10), it is logged. But when I ping other location (ex 10.18.31.16 to 10.18.64.10) it isn't logged.
Below is my configuration

policy condition test source ip 10.18.31.16
policy action permit
policy rule test precedence 1000 condition test action permit log

And result
SWF07# show active policy rule test
Policy From Prec Enab Act Refl Log Trap Save Def Matches
test cli 1000 Yes Yes No Yes Yes Yes Yes 58
(L2/3): test -> permit
log interval: 30


SWF07#
SWF07#
SWF07# show qos log
**QOS Log**


SWF07# show active policy rule test
Policy From Prec Enab Act Refl Log Trap Save Def Matches
test cli 1000 Yes Yes No Yes Yes Yes Yes 68
(L2/3): test -> permit
log interval: 30


SWF07# show qos log
**QOS Log**
4/23/12 14:45:32 [@14:45:26] rule 'test' matched:accept
4/23/12 14:45:32 svlan 250 VRF default port 3/8 -> 1/26
4/23/12 14:45:32 MAC C4:00:02:DC:00:00 -> F0:7D:68:FE:E3:6A
4/23/12 14:45:32 TOS 0x00 (ICMP 8:0) 10.18.31.16 -> 10.18.31.10
4/23/12 14:45:32 [@14:45:26] rule 'test' matched:accept
4/23/12 14:45:32 svlan 250 VRF default port 3/8 -> 1/26
4/23/12 14:45:32 MAC C4:00:02:DC:00:00 -> F0:7D:68:FE:E3:6A
4/23/12 14:45:32 TOS 0x00 (ICMP 8:0) 10.18.31.16 -> 10.18.31.10
4/23/12 14:45:32 [@14:45:26] rule 'test' matched:accept
4/23/12 14:45:32 svlan 250 VRF default port 3/8 -> 1/26
4/23/12 14:45:32 MAC C4:00:02:DC:00:00 -> F0:7D:68:FE:E3:6A
4/23/12 14:45:32 TOS 0x00 (ICMP 8:0) 10.18.31.16 -> 10.18.31.10
4/23/12 14:45:32 [@14:45:26] rule 'test' matched:accept
4/23/12 14:45:32 svlan 250 VRF default port 3/8 -> 1/26
4/23/12 14:45:32 MAC C4:00:02:DC:00:00 -> F0:7D:68:FE:E3:6A
4/23/12 14:45:32 TOS 0x00 (ICMP 8:0) 10.18.31.16 -> 10.18.31.10
4/23/12 14:45:32 [@14:45:26] rule 'test' matched:accept
4/23/12 14:45:32 svlan 250 VRF default port 3/8 -> 1/26
4/23/12 14:45:32 MAC C4:00:02:DC:00:00 -> F0:7D:68:FE:E3:6A
4/23/12 14:45:32 TOS 0x00 (ICMP 8:0) 10.18.31.16 -> 10.18.31.10


SWF07#

[silvio]

Hi,
your config is correct. Please open a SR and let us know....
regards
Silvio

[chithanhg0002097]

Hi

We are new Alcatel Customer and I don't know how to open SR.
Could you let me know? Thanks

[bitbin]

If you have support direct from Alcatel-Lucent can use their support site http://service.esd.alcatel-lucent.com/

Depending on how you purchased the product, you might have to work with the reseller you purchased from to have them get you the access or in some cases, have them open the case on your behalf