SAS E 7210

[Koekemgs]

Hi
I cannot login to do configs.
Is thier any way of resetting switch.
Have no problem login with other 7210 SASE's.
Rgds
Gary

[mivens]

The factory default BOF password is "password".
Power cycle the switch and interrupt the boot loader by pressing any key from the console when prompted. Change the boot parameters so the config file is "none".

From release 4.0 onwards the BOF password can be changed by the user. If you don't know what the BOF password is, enter an incorrect password three times and it will reboot with factory default settings after removing all files from the flash apart from the boot image.

[Koekemgs]

Hi
Device was faulty had it replaced.
Rgds