OXE Installation on VMware complete_procedure

vad
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 3852
Joined: 23 Sep 2004 06:47

Re: OXE Installation on VMware complete_procedure

Post by vad »

If you have OXE SW - you have PC Installer.
f.e. if you have SW j1410 - you can find PC Installer in next folder - /dhs3mgr/j1410/pcmao/boot_res/pcinstall
User avatar
stefanc
Member
Posts: 129
Joined: 19 Jan 2010 17:09
Location: Sweden
Contact:

Re: OXE Installation on VMware complete_procedure

Post by stefanc »

Hi !
It is on the install media. eg: D:\DHS3mgr\f5401\pcmao\boot_res\pcinstall

Regards

/S
mimi4307

Re: OXE Installation on VMware complete_procedure

Post by mimi4307 »

Hello !

I Try this, but when the system reboots, it says:

CLIENT MAC ADDR
DHCP../

And nothing more ...then
PXE-53 : No boot filename received
Operating Sytem not found

This test with Interface Bridge but uf I Try witch Interface Nat, when the system reboots, it says :
PC Installer find MAC ADDR and IP Adress but it says:
PXE-11 : ARP TIMOUT

I don't see where is my fault, please help me !

Thanks for your time.
cavagnaro

Re: OXE Installation on VMware complete_procedure

Post by cavagnaro »

Check firewall as your vm can't get IP address from your PC

Sent using Tap Talk on my Xperia Z
User avatar
Eliott
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 640
Joined: 10 Feb 2010 03:43

Re: OXE Installation on VMware complete_procedure

Post by Eliott »

Which OXE version?
Which PC Installer Version?
Firewall checked as already suggested?
What are the VM settings? And VM LAN settings?
outerman8651

Re: OXE Installation on VMware complete_procedure

Post by outerman8651 »

poopboypat wrote:omnipcx enterprise pc installer -

I was wondering where I could find this?

Why not try this version??http://filemare.com/browse/193.148.44.195/alcatel
outerman8651

Re: OXE Installation on VMware complete_procedure

Post by outerman8651 »

"Must have OPS on your PC hard drive" the OPS means??
User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4058
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: OXE Installation on VMware complete_procedure

Post by tot3nkopf »

outerman8651 wrote:the OPS means??
License files.
sandy_shy2006

Re: OXE Installation on VMware complete_procedure

Post by sandy_shy2006 »

HI

I am unable to install Rel j141045a on vmware.

i get the below error all the time
PXE-E51 :NO DHCP OR PROXYDHCP OFFERS WERE RECIEVED
PXE-M0F:EDITING INTEL PXE ROM
OPERATING SYSTEM NOT FOUND

I am using windows 8 professional 64 bit
C:\dhs3mgr and have all 3 folder in it
using named piped and pc installer installed from the same folder above.

i dont have any networked as its a standalone PC...i even tried a loopback by connecting lan cable.

please suggest what else should i check. what settings needed in firewall ???

Regards

Sandeep
User avatar
tot3nkopf
Alcatel Unleashed Certified Guru
Alcatel Unleashed Certified Guru
Posts: 4058
Joined: 02 Feb 2006 10:41
Location: Germany & Romania
Contact:

Re: OXE Installation on VMware complete_procedure

Post by tot3nkopf »

sandy_shy2006 wrote:
i get the below error all the time
PXE-E51 :NO DHCP OR PROXYDHCP OFFERS WERE RECIEVED
PXE-M0F:EDITING INTEL PXE ROM
OPERATING SYSTEM NOT FOUND

So you do not have a problem loading vmware, but rather sending a DHCP offer. You answer yourself. (I would suggest to disable local firewall when you load)
Locked

Return to “Other”