Page 2 of 3
Posted: 18 Jan 2010 07:54
by vad
Try to play with timer 54 - New answer timer.
The user hangs up while making an external call, if he unhooks during this timer, he is again connected to the network. Can be reduced to 1 sec.
Not manage value 1.
Posted: 19 Jan 2010 01:50
by andriuja
Dear Vad,
This timer is only for analog sets?
Or it will be changed for digital?
Posted: 19 Jan 2010 02:15
by vad
Not sure. Just try. When you change timer - new value used immediate (not necessary to reset PBX).
Posted: 19 Jan 2010 04:07
by andriuja
It's quite difficult, because we have a lot of services on our PABX, 24 Hours.
That is why I need to know exactly about which timer introduce dellay.
Ok. When it will be possible to restart, I will tell you about result.
Posted: 19 Jan 2010 04:11
by vad
restart not needed!!! Just change timer and check.
Posted: 19 Jan 2010 06:03
by vad
Some additional questions:
- type of external connection (ISDN, R2...)?
- analog sets - usual users or not? CC agent,..?
- outgoing connection - usual via prof TG seizure or ARS?
Posted: 19 Jan 2010 06:33
by andriuja
Dear Vad,
Timer T54 was changed from 25 to 10 (10= 1 sec, am I wright?) - the same situation. Delay remain.
Regarding your additional questions:
-Type of external connection - ISDN
- analog sets are usual users (not agent, not group.....)
- outgoing connection via prof TG seizure.
Call from analog to external via ISDN trunk.
In case of call from digital set release comes immediatly, but in case of analog sets with delay.
Posted: 20 Jan 2010 08:45
by andriuja
Do you have any ideas?
Posted: 10 Feb 2010 15:15
by Eliott
Is CLIP used?
Posted: 11 Feb 2010 16:23
by andriuja
NO, it's not used.
I don's see any relations between CLIP and Delay....? What do you mean?