IBM Appliance servers, stopping at Linux.ram loading???

alex.marete · Post by **alex.marete** » 05 May 2010 03:55

Hi VAD

here is the log file can you advise on anything that you might see ?

Thanks

Pedro

charpdy · Post by **charpdy** » 05 May 2010 05:03

Hi
are you using a direct connection from pc-installer pc to appliance server ?. it looks like there are more than 1 dhcp server available.

The thing about not loading part 2, i have seen many times, usually when i forget to choose appliance server instead of alize.

/Per

pgemelgo · Post by **pgemelgo** » 05 May 2010 05:06

Hi All

Thank you all for the valuble input. We got it working!!!! WWOOOHOOOOO, it was the PC INstaller Version that we were using that was wrong, but now working.

Thanks all.

MTConsulting · Post by **MTConsulting** » 06 May 2010 20:50

Hi Freedom,

Thanks for your help mate, next time I will climb in behind the cabinet myself and see if there really is a serial port instead of taking some one elses word for it!!!!

Hooked up serial to lappy, hit N for security question etc...runs like a beauty now...thanks again!!!!!

freedom · Post by **freedom** » 07 May 2010 06:44

NO problem, glad that I could help you.

alex.marete · Post by **alex.marete** » 21 May 2010 09:26

I had exact problem on R9.0. you must use PC installer 2.24. There is nothing to do with Redhat. I use Win XP to load the versions onto the IBM servers.

Alcatel Unleashed

IBM Appliance servers, stopping at Linux.ram loading???

Syslog PCX Installer