Alcatel Unleashed

Power CPU is very fast on BootUp. about 3times faster then CPU -4

Hi

This speed is very, very good.

Did any one test, if with LOLA the CPUe-2 could be load with R8?

PuGZopf wrote:Did any one test, if with LOLA the CPUe-2 could be load with R8?

No, R8 doesn't load on CPUe-2 with latest LoLa 400_6_1.
It is necessary to try boards GA-3 and GD-3 - can DSP-processors there will be defined?

If you fit a 256 Mb RAM to a CPU-4 it screams, very fast reboots!!

MTConsulting wrote:If you fit a 256 Mb RAM to a CPU-4 it screams, very fast reboots!!

But processor AMD 100MHz (used in CPU-4/3m) with 256MB PC133 SD-RAM more slowly than FreeScale MPC8377 667MHz (used in PowerCPU) with 256MB DDR2

Puno wrote:But processor AMD 100MHz (used in CPU-4/3m) with 256MB PC133 SD-RAM more slowly than FreeScale MPC8377 667MHz (used in PowerCPU) with 256MB DDR2

I'm not talking about Power CPU, this is for existing CPU-4's, there is a huge improvement in them when 256Mb ram is fitted. This ram is now very cheap, many IT managers have boxes of it lying around in their offices, I get it for free.

HI

I have a power CPU and the config port is set to consol, I try and change it back to PPP but after reboot it is back to consol, does anyone know why or has anyone seen this happen

thanks in advance

there is a new patch (R800_032_001) and OMC (OMC 800/22.1b) on the BPWS.
As I know there are some corrections about the V24 serial connection In the in the new release.

Right, and that the OMC Crashed if a diversion for more then one services is added. Plus Labelset don´t work for older Adavced etc sets ( no Label in keys shown )
and two thinks more. I don´t have the list here yet.