IP Touch 4068 SIP

[cavagnaro]

please, whatever communucation you have post solution here. Idea of the forum is to others benefit from knowledge exchange, just like you did. If want to keep that between two parties, at least post solution steps. We don't charge nothing for the forum, so at least share knowledge for public here.

Thanks

[lucky]

Hi desidia
I have a 4038EE running on fritzbox and on octopus F50 except MWI please see also thread
viewtopic.php?f=227&t=14190&p=89086&hilit=lucky#p89046

Regards
Lucky

[allenkenny]

HI Guys,
I am beginner in the pbx technology, I Have 5 Alcatel Lucent 8082 IC Phones with no omni PCX and i want to connect it to free pbx to use it as a sip phone.
please help me to sort out this issue.

Thanks in advance

regards
Allen

[cavagnaro]

Install a DM (Device manager) and configure them to register against that Asterisk box.

[allenkenny]

Dear cavagnaro,
Thank you for your support,
Could you please brief the steps to install DM and the remaining procedure

Regards
Allen

[allenkenny]

hei there,
I tried for the software, but i didn't get the software from the internet. Where do i get the link for downloading the software for 8082 IC Phones.

Thanks in advance

Regards
Allen Kenny jones

[cavagnaro]

DM is available on Omnivista or OpenTouch

Enviado de meu E6633 usando Tapatalk

[allenkenny]

Can anyone give me the download for Omnivista or opentouch

Thanks in advance

Allen

[cavagnaro]

Ermmm those are other products and need licenses. Other thing you can try is to get old SDK and use that DM, but it is discontinued so it will be hard to get...

Enviado de meu E6633 usando Tapatalk

[navin92]

Hi Guys,

My IP Touch 4068 is currently on Version NOE 4.33.40 and I can't seem to change the "Run Mode" to SIP.
What do I need to flash it / to enable SIP config on this phone?

It keeps trying to retrieve "startnoe-MACADD" based on my TFTPD logs.